User's Manual

C/N：QL-19080102
Copyright © 2019 QUICKLINK. All rights reserved.
Set Interval
interval,x1,x2,password
Eg: interval,30,100,123456
30=Ignition ON
100=Ignition OFF
X1=Ignition ON interval (second),
X2=Ignition OFF interval (second).
Enable/Disable Harsh
Acceleration Alarm
A Harsh Accel,ON/OFF,password
Eg:
A Harsh Accel,ON,123456
A Harsh Accel,OFF,123456
The device will enable/disable the harsh
acceleration alarm
Enable/Disable Harsh Braking
Alarm
A Harsh Brake,ON/OFF,password
Eg:
A Harsh Brake,ON,123456
A Harsh Brake,OFF,123456
The device will enable/disable the harsh
braking alarm
Set Speed Chaning Range
Threshold of Harsh Behaviour
speed,x,password (x=0-250km/h)
Eg:
Speed,10,123456
When device enabled harsh acceleration
alarm or harsh braking alarm, it will trigger
alarm when the speed changing range of
harsh behaviours over the set value
Enable sleep mode
sleep enable,password
Eg: sleep enable,123456
Config OK=Set successfully
It
’
s for save battery purpose
Diable sleep mode
sleep disable,password
Eg: sleep disable,123456
Config OK=Set successfully
Enable Limit for Voice
monitoring,
LisLimit,ON,password
Eg: LisLimit,ON,123456
It will limit the voice monitoring phone
number within the preset SOS alert number
Disable Limit for Voice
monitoring
LisLimit,OFF,password
Eg: LisLimit,OFF,123456
Default setting
8. Trouble shooting
8.1 After installing it in the first time, if device cannot get connected with platform server, at this
time it is “logged off” status in platform.
Follow the instructions one by one as below:
8.1.1 Call the device to see what happens.
If ring: go to the next step.
If not ring:
a. Check whether the SIM card is installed correctly or not. Check whether the connection of
power-line is correct or not . (Details: If the users are testing the device in office or at home, they
have to connect device with 12V DC external power supply. If it is tested in the car, make sure the
installer connect all the cable correctly.)
b. Check the LEDs’ status. In normal working status, the red LED is in bright flash 0.1s dark 2s,
yellow GSM LED bright flash 0.1s dark 2s and blue GPS LED bright flash 0.1s dark 2s
c. Check whether the vehicle is in no GSM area, such as basement;
8.1.2 Check whether the device reply after sending SMS command.