User's Manual

C/N：QL-19080102
Copyright © 2019 QUICKLINK. All rights reserved.
Notes:
 Please mount the device steadily on the flat place before using;
 Please make sure the voltage value is right before connecting with battery, and placing the
wires to where shouldn
’
t be trodden;
 Please power off when plugging or taking out of any module or connector;
 Please keep the device dry and don
’
t let any liquid fall into the device in case any damage
caused in the device or circuit;
If any problem caused as follows, please turn to professional technician:
 When power wire, keyboard, or socket are damaged;
 When liquid infiltrating into the device;
 When the device work unusually or cannot resume to normal even operated according to the
instruction;
 When the device cannot work as usual after falling, throwing or breaking;
 When there is obvious damage in the device.
Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two co
nditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause un
desired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
RF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment shall be installed and operated with minimum distance 20cm between the radiator &
body.