User's Manual

C/N：QL-19080102
Copyright © 2019 QUICKLINK. All rights reserved.
Voice Monitoring
tap,password
Eg: tap,123456
The device will call back to the phone
number who sent the command
Enable Defence
arm,password
Eg: arm,123456
Config OK=Set successfully
Config failed=fail to set
If defence enabled, you are able to get illegal
start alarm when ignition is on.
Disable Defence
disarm,password
Eg: disarm,123456
Config OK=Set successfully
Config failed=fail to set
Online Configuration
ss,APN,APN
’
s username,APN
’
s
password,IP,PORT,Device
ID,Password
Eg:
ss,quicklink.claro.co.ec,,,158.69.11
9.37,4099,13800000001,123456
Config OK=Set successfully
Config failed=fail to set
Check Stauts
status,password
Eg: status,123456
Replied SMS:
GSM=31
GPRS=1
GPS=10
ACC=N0
SPEED=120
ACCON=30S
ACCOFF=120S
VCC=12V
IMEI=356823031234501
If the password is worng, it will reply: Get
status failed
Check Sevice Number
GetService,password
Eg: getservice,123456
The device will reply with the service
numbers
Enable Auto Answer Call
(Voice Monitoring)
AUDIO-EN,password
Eg: audio-en,123456
Config OK=Set successfully
Config failed=fail to set
Disable Auto Answer Call
AUDIO-DIS,password
Eg: audio-dis,123456
Config OK=Set successfully
Config failed=fail to set
Recover to Default Settings
Reset,password
Eg:Reset,123456
It will recover the parameters to default
information