Installation Guide

7
4. With the rail installed on the furniture/cabinet and the door installed on the rail, move
the door to the desired closed position (where the soft closure will slowly bring the door
into this position).
5. Position the soft-close actuator on the top of the door so that the tip of the actuator
rests in the captured position in the soft-close mechanism (figure 5c).
6. Mark the location of the actuator on the top of the door, then remove the door and
install the actuator on the door by predrilling the mounting holes and using the supplied
screws (figure 5d).
Figure 5c
Figure 5d