Installation Guide

9
Specifications for
Furniture Barn Door Hardware Straps
Helpful design/installation specifications:
When using the standard 1” long rail standoffs
(included in rail kit)
1¼” = Distance between the front face of furniture/cabinet to the back of the strap
(installed on the rail)
1¼” minus door thickness = gap between furniture/cabinet face and back of door
(example: 1⅛” thick door would have a gap of ⅛”)
Lag Screw length = 2”
Lag screw will penetrate into the wood header by ⁄”
Maximum door thickness = 1⅛”
When using the optional ⁄” long rail standoffs
(sold individually, NOT in rail kits)
1⅝” = Distance between the front face of furniture/cabinet to the back of the strap
(installed on the rail)
1⅝” minus door thickness = gap between furniture/cabinet face and back of door
(example: 1½” thick door would have a gap of ⅛”)
Lag Screw length = 2⅛”
Lag screw will penetrate into the wood header by ⅝”
Maximum door thickness = 1½”
1⅝” to 2” = Distance from Cabinet face to Front surface of the strap (including mounting
acorn nut for wheel)
Note: This dimension depends on strap style