Installation Manual (x1) Left (x1) 3mm (x2) (x1) 2mm ST4.2x25(x4) (x1) Right 1 Install soft close assembly on the track. Left Right 1.1 1.2 2mm 2 2.1 Install the track. 2.2 (x5) Install the door.
3 H 3.1Slide the door to the open position, use a pencil to mark the actuator on the top of the door. x2 3.2 Take the door off and install the actuator.
4 4 Make sure that the soft close assembly is in the open position. Use caution, as you may need to use force. Right Left catch gap catch gap closed position closed position open position 5 5 Loosen the track screws which near the soft close can make easier installation. open position 6 6 Reinstall the door and tighten the screws. 7 7 Slide the door to the open position and the closed position.
