email to: service@cshardware.
• Rolling Door Here is an easy way to order your Rolling Door Hardware Determine what type of Roller Straps you will need. 1 Roller Straps (Fasteners Fasteners & Roller included). Hand Forged Traditional Style Spade & Fleur-de-Lis are hand forged, hammered finish, custom made Spade 10.5” H x 3” W Great for accessibility planning B A Basic Rectangle 2.62W x 5”H C Circles 2”W x 4.86” J K 1B B C D E F Cube Stick 2.9”W x 6.8”H M GingerBread 3.625”W x 8.
• Barn Door 2 Select Center Guide & Stops 2A Adjustable Center Guide Spade & Fleur-de-Lis are hand forged, hammered finish, custom made hardware. QG.1301.DG.08 QG.1201.08 QG.1101.08 Part# Spade Fleur-de-Lis Description QG.1101.07 QG.1101.08 QG.1201.07 QG.1201.08 QG.1301.DG.02 QG.1301.DG.08 QG.1301.DG.07 Rails Separate rail Lengths to build custom length doors, combine any of the lengths of rail sold here using the splice kit sold below. Guide can be adjusted to accommodate various door widths.
• Rolling Door Instructions Roller Strap Installation 1. Install the roller straps onto the top edge of the door. The location of these straps is critical for the proper, safe use of the rolling door. 2. The distance between the top of the door and the outer diameter of the back of the wheel (measured from the back of the door) should be 13/16” – 7/8” (this will achieve approximately 3/32” gap between the top of the door and the rail when these measurements are achieved). 3.
