Product Brochure

Flow Pressure
Unit Rate Drop
Entering Water Temperature (Deg. F.) - BTU/hrs.
G.P.M. (ft.) 130 140 150 160 170 180 190 200 210
1 0.06 2095 2410 2700 3000 3350 3650 3860 4000 4105
KS
3 0.422 2240 2650 3000 3350 3765 4120 4350 4530 4635
2004
5 1.026 2350 2755 3140 3530 3940 4330 4590 4810 4935
1 0.12 3410 4050 4655 5265 5860 6330 6700 7110 7270
KS
3 1.19 3735 4395 5060 5735 6330 6825 7120 7530 7790
2006
5 2.6 3860 4540 5225 5910 6560 7030 7415 7800 8010
1 0.12 4300 5000 5765 6500 7370 7960 8400 8735 8920
KS
3 1.19 4580 5380 6195 7050 7930 8610 9010 9445 9740
2008
5 2.6 4760 5625 6450 7290 8200 8925 9360 9785 10020
1 0.41 5530 6350 7150 7975 8780 9465 9975 10330 10520
KS
3 2.78 5880 6710 7740 8710 9625 10540 11060 11530 11740
2010
5 3.92 6070 7030 8000 9030 10025 10920 11525 11995 12180

Performance and Specifications
Model # AB C DWt.(lbs.)
KS 2004 10
7
⁄8" 13
7
⁄8" 13
7
⁄8"3
1
⁄2"9
KS 2006 10
7
⁄8" 13
7
⁄8" 20" 3
13
⁄16" 10
KS 2008 10
7
⁄8" 13
7
⁄8" 20" 3
13
⁄16" 10
KS 2010 14
13
⁄32" 17
23
⁄32" 23
5
⁄8" 4" 14
As part of our continuous product improvement, Smith’s Environmental Products reserves the right to alter specifications without notice.
CATALOGUE QO2000 • Effective 7/1/15
Models:
KS 2004
KS 2006
KS 2008
KS 2010
• Quiet efficient operation
• Four sizes to choose from for
greater flexibility
• Installer friendly
• Certified performance
• Easily fits in tight spaces or hard-to-heat
areas
KICKSPACE HEATERS
ENVIRONMENTAL PRODUCTS
KICKSPACE HEATERS
MODELS
KS 2004, KS 2006,
KS 2008, KS 2010
SUB MI TTAL DATA INFOR M AT I O N
ENVIRONMENTAL PRODUCTS
1875 Dewey Avenue, Benton Harbor, MI 49023 • [phone]
• All capacities are rated by RTS with the kickspace installed under a cabinet. That is, they are not rated in free air.
• For low speed ratings use: .85 for the KS2004, .75 for the KS2006, .70 for the KS2008, and .65 for the KS2010.
• Heat throw: KS2004 = 10 ft. @ 50 CFM; KS2006 = 10 ft. @ 75 CFM; KS2008 = 10 ft. @ 90 CFM; KS2010 = 10 ft. @ 125 CFM.
Quiet Comfort! Performance and Style!
Fan Convector/Baseboard Comparison
At 200°F EWT; 20°TD At 650 BTU/FT Low Pressure Steam
Model# Baseboard C.I. Radiators
KS 2004 6.97 linear ft. 18.9 square ft.
KS 2006 11.6 linear ft. 31.4 square ft.
KS 2008 14.5 linear ft. 39.3 square ft.
KS 2010 17.8 linear ft. 48.0 square ft.
Capacity for the Quiet-One 2000 Kickspace Heaters - BTU/HR @ 65°F Entering Air
Engineering Specifications
Construction. The one piece chassis with removable grille is manu-
factured from high grade zinc coated steel. The grille and exposed parts
of the chassis are painted with a copper/brown baked enamel finish.
Heat Exchanger. A highly efficient, headered coil, made of copper
tubes expanded into smooth aluminum plate fins (10 FPI), tested at 300
PSI, and sealed for quality. The heat exchanger is positioned in the
kickspace for maximum heat transfer over the coil.
Fan and Motor Assembly. High spec tangential SEL fan and
motor assembly consists of high static fan wheel and scroll, detachable
motor, replaceable “easy glide” sleeve bearings, and the fan and motor
cut out are protected to UL/CSA specifications. This fan and motor
assembly is designed to enhance the “coanda” effect, and to run
whisper quiet without vibration.
Controls. The KS units have integral two speed, max.-off-min., fan
switches (optional wall mounted fan speed controller is available). The
LTC — low limit aquastat is also a high spec item with a close tolerance
designed to close on a rise to 110°F+/-3°F and open at 90°F+/-3°F.
Water Connections. Supply and return connections are
1
⁄ 2 " sweat
connections located to the right of the unit as you face the grille. A
water vent with wide convenient screwdriver slot is accessible through
the grille.
Electrical Connections. 120/60/1 power supply is required. All
that’s required is to knock out the junction box hole you want to use
and wire to the L1 and L2 leads. There is a convenient one screw
access plate on the top of the unit to get at the ground
.
Dimensions