Technical Specifications

QuietWarmth
®
FILM
Radiant Heat Film for Floating Floors
Radiant Heat Film for Floating Floors
QuietWarmth
®
Radiant Heat Film for Floating Floors
is an exciting new product from the manufacturers
of QuietWalk
®
underlayment. We’ve taken our vision
to expand simplicity and quality by partnering with
Calorqiue’s
®
unique patented radiant heat technology.
It is ideally suited for floating flooring materials like
laminiate, wood, and Luxury Vinyl Tile.
Because of our strong vision, QuietWarmth
®
Radiant
Heat Film for Floating Floors will completely save you
time and money while easily enhancing the floating
floor products you choose to combine function and
comfort to any living space in your home.
A D V A N T A G E S
QuietWarmth
TM
vs. Other Electric Floor Systems
• There is no easier radiant floor heating system to install.
Simple 3 step process!
1. Install underlayment.
2. Roll out electric radiant heat film.
3. Install final floor covering
• Will warm the floor and depending on performed heat loss
calculations, QuietWarmth can warm the entire room when
it is install in at least 80% of the room’s floor.
• Minimal thickness profile. Ultra-thin (less than .016”)
heated panels keeps same floor heights through room
transitions.
• Provides uniform heat. Your floor is heated uniformly
with no gaps and the radiant heat is dispersed evenly
throughout the room.
• Quiets your floor when used in combination with
QuietWalk underlayment, you achieve a superior sound
rating: IIC 71 & STC 67
• Factory Attached Lead Wires. 15’ lead wires are
connected to one end of each mat for easy routing and
final connecting to the thermostat.
• Safety certified by ETL in compliance with UL Standards
for radiant flooring in the USA and Canada.
• Costs less to operate. Even heat distribution allows the
QuietWarmth systems to cycle quicker resulting in less
energy consumption.
QuietWarmth
TM
vs. Hydronic (water)
• Maintenance free. No mechanical heaters to
heat the water and pumps to move the water. No
potential maintenance issues to worry about.
• Even heat distribution. Water near the end of
the system has cooled compared to water at the
beginning of the system.
• More efficient. Water systems must heat the water,
then move the water by pumping it through pipes.
With Floating Floor Heat, all the electric power is
used to heat the floor.
• Does not raise the floor. Most hydronic systems
raise the floorlevel by as much as 1½ inches to
make room for the water pipes.
• Simpler, lower cost installation. No water heaters,
pumps, manifolds tubing and other mechanical
parts.
QuietWarmth
TM
vs. Electric Baseboard
• More efficient and more even heat distribution.
Baseboard heating is located at the room perimeter
and overheats the outside of the room. It does not
warm the floor or your feet.
• Safer. Baseboard heating can be hot to the touch.
• Better appearance. Baseboard heaters are unsightly
while Floating Floor Heat is not visible after
installation.