Technical Specifications

ManualsBrandsQuiet Warmth ManualsElectric In-Floor Heating240V Radiant Floor-Warming Mat For Traditional Tile (15 sq. ft.)

QuietWarmth

FILM

Peel & Stick Radiant Heat for Tile Floors

QuietWarmth

Tile Floor Heat is an ultra-thin,

highly efﬁcient radiant heat ﬁlm integrated in an

anti-fracture membrane.

One room or an entire house will beneﬁt from

radiant ﬂoor heat as a primary or supplemental

heat source.

QuietWarmth

Tile Floor Heat low energy

consumption mats are designed to deliver optimal

thermal comfort through evenly distributed heat

with no cold or hot spots.

A D V A N T A G E S

QuietWarmth vs. Other Electric Floor Systems

• There is no easier radiant ﬂoor heating system to install.

Simple 3 step process!

1. Prepare a clean and stable sub-ﬂoor.

2. Place QuietWarmth Tile Heat Mat, peel

back release liner, and adhere to sub-ﬂoor.

3. Thin set and tile on surface.

• Provides Uniform Heat. Your ﬂoor is heated uniformly with

no gaps and the radiant heat is dispersed evenly throughout

room.

• Minimal thickness. Thin .03” proﬁle will not raise the

height of the ﬂoor. Easy to peel release liner for fast and

easy installation.

• Factory Attached Leads. 15’ lead wires are connected to

one end of each mat for easy routing.

• Costs less. Even heat distribution allows the QuietWarmth

systems to cycle quicker resulting in less energy actually

being used.

QuietWarmth

vs. Hydronic (water)

• Maintenance free. No mechanical heaters to heat

the water and pumps to move the water. No potential

maintenance issues to worry about.

• Even heat distribution. Fluids near the end of the tubing

cools compared to ﬂuid at the beginning of the tubing.

• More efﬁcient. Hydronic systems must heat the water, then

move the ﬂuid by pumping it through pipes.

• Does not raise the ﬂoor. Most hydronic systems raise the

ﬂoor to make room for the tubing.

• Simpler, lower cost installation. No water heaters, pumps,

manifolds tubing and other mechanical parts.

QuietWarmth vs. Electric Baseboard

• More efﬁcient and more even heat distribution. Baseboard

heating is located at the room perimeter and overheats the

outside of the room. It does not warm the ﬂoor or your feet.

• Safer. Baseboard heating can be hot to the touch.

• Better appearance. Baseboard heaters are unsightly while

QuietWarmth Tile is not visible after installation.

Peel & StickRadiant Heat for Tile Floors

Summary of content (2 pages)

PAGE 1
QuietWarmth® Tile Floor Heat is an ultra-thin, highly efficient radiant heat film integrated in an anti-fracture membrane. One room or an entire house will benefit from radiant floor heat as a primary or supplemental heat source. QuietWarmth® Tile Floor Heat low energy consumption mats are designed to deliver optimal thermal comfort through evenly distributed heat with no cold or hot spots. ADVANTAGES QuietWarmth vs.
PAGE 2
ENVIRONMENTAL ATTRIBUTES • LEED Compliant for: EA Prerequisite 2, EA Credit 1, MR Credit2.1, MR Credit 2.2, MR Credit 5.1, EQ Prerequisite 1, EQ Credit7.1, EQ Credit 3.1, EQ Credit 3.2, ID Credit 1 • 99.9% of energy is turned into heat with no parasitic loss. APPROVED FLOOR COVERING MATERIALS • Ceramic & Porcelain Tile Floors* • Marble floors* • Stone floors* * Refer to Floor Covering Manufacturer’s specifications for compatibility of their product over any radiant heat before installation.