Owner's Guide

ManualsBrandsQuietCool ManualsAttic FansQuietCool 1959 CFM 2-Speed Gable Mount Attic Fan

1-888-QUIETCOOL

4. In the junction box, with a wire nut, tie the white common wires together. Using the green ground

screw, ground the green wire from the fan and the 2 wire Romex from the thermostat, to the junction

box.

5. High Speed: Tie the black wire from the fan to the taped white wire from the thermostat (see Figure

3.2A)

Low Speed: Tie the red wire from the fan to the taped white wire from the thermostat (see Figure

3.2B)

6. Tie the black wire from the power source to the black wire from the thermostat. Replace the cover

on the junction box.

7. In the themostat, tie the black wire to one of the black wires from the thermostat. Tie the taped

wire to the other black wire from the thermostat. Using the ground screw in the thermostat, ground

the ground wire from the 2 wire Romex.

8. Tie the two remaining black wires together. Then, tie the remaining copper wires together.

Ground the fan to the junction box

using the green ground screw

Specialty Series Fan

Junction

Box

Power Source

14-2 Wire

60°

Thermostat

FAN ON

TEMPERATURE

90°

120°

ADJUSTABLE

TEMPERATURE THERMOSTAT

CAUTION

Automatically started device - to reduce the

risk of injury disconnect from power supply

before servicing. For residential use only. See

instructions for wiring diagram.

60°

ADVANCED ATTIC GABLE FANS

Figure 3.2A