Instructions / Assembly

7
1-888-QUIETCOOL
2. Open up the thermostat that is connected to the fan. Remove the power cord. Remove the bracket mounting
the thermostat to the flex tubing and remove the thermostat. Mount the junction box to the flex tubing with
the included bracket and mount the junction box. Bring your 2 wire romex from the power source into the
junction box.
3. Mount the thermostat in the best location for thermostat readings. Run a 2 wire Romex from the junction box
to the thermostat. Tape the white wire on each side of the 2 wire Romex to indicate that it is a switch leg.
4. In the junction box, with a wire nut, tie the white common wires together. Using the green ground screw, ground
the green wire from the fan and the 2 wire Romex from the thermostat, to the junction box.
5. High Speed: Tie the black wire from the fan to the taped white wire from the thermostat.
Low Speed: Tie the red wire from the fan to the taped white wire from the thermostat
6. Tie the black wire from the power source to the black wire from the thermostat. Replace the cover on the
junction box.
7. In the themostat, tie the black wire to one of the black wires from the thermostat. Tie the taped wire to the
other black wire from the thermostat. Using the ground screw in the thermostat, ground the ground wire from
the 2 wire Romex.
8. Tie the two remaining black wires together. Then, tie the remaining copper wires together.
Figure 3.2C: Thermostat Wiring in a Remote Location - High Speed
Ground the fan to the junction box
using the green ground screw
Specialty Series Fan
Junction
Box
Power Source
14-2 Wire
14-2 Wire
14-2 Wire
60°
Thermostat
FAN ON
TEMPERATURE
90°
120°
®
ADJUSTABLE
TEMPERATURE THERMOSTAT
CAUTION
Automatically started device - to reduce the
risk of injury disconnect from power supply
before servicing. For residential use only. See
instructions for wiring diagram.
60°
ADVANCED ATTIC GABLE FANS
®
Ground the fan to the junction box
using the green ground screw
Specialty Series Fan
Junction
Box
Power Source
14-2 Wire
14-2 Wire
14-2 Wire
60°
Thermostat
FAN ON
TEMPERATURE
90°
120°
®
ADJUSTABLE
TEMPERATURE THERMOSTAT
CAUTION
Automatically started device - to reduce the
risk of injury disconnect from power supply
before servicing. For residential use only. See
instructions for wiring diagram.
60°
ADVANCED ATTIC GABLE FANS
®
Figure 3.2D: Thermostat Wiring in a Remote Location - Low Speed
Ground the fan to the junction box
using the green ground screw
Specialty Series Fan
Junction
Box
Power Source
14-2 Wire
14-2 Wire
14-2 Wire
60°
Thermostat
FAN ON
TEMPERATURE
90°
120°
®
ADJUSTABLE
TEMPERATURE THERMOSTAT
CAUTION
Automatically started device - to reduce the
risk of injury disconnect from power supply
before servicing. For residential use only. See
instructions for wiring diagram.
60°
ADVANCED ATTIC GABLE FANS
®
Ground the fan to the junction box
using the green ground screw
Specialty Series Fan
Junction
Box
Power Source
14-2 Wire
14-2 Wire
14-2 Wire
60°
Thermostat
FAN ON
TEMPERATURE
90°
120°
®
ADJUSTABLE
TEMPERATURE THERMOSTAT
CAUTION
Automatically started device - to reduce the
risk of injury disconnect from power supply
before servicing. For residential use only. See
instructions for wiring diagram.
60°
ADVANCED ATTIC GABLE FANS
®