Installation Instructions

1-888-QUIETCOOL

Optional Remote Turn Off (see Figure F & G)

The optional remote turn off allows you to turn off the fan from a single pole switch

mounted on your wall. To perform this installation, you will need a single pole switch

and 2-wire Romex.

1. Connect the black wire from

your 2-wire Romex to the black

wires in the Hub.

2. Using electrical tape, tape

the white wire from your 2-wire

Romex to indicate it carries

power. Connect the taped white

wire to the yellow wire in the Hub.

3. Connect the ground wire from

your 2-wire Romex to the ground

wires in the Hub.

4. Run your wire down the wall to the desired

location and mount your electrical box.

5. Using electrical tape, tape the white wire from

your 2-wire Romex to indicate it carries power.

6. Connect the ground wire to the green ground

screw on the switch. Connect your black and

white taped wire to the switch and finish the

installation. (see Figure G)

Power

Cord

POWER STATUS SPEED

JOIN FAN

Switch

14-2 Wire

Taped White

Wire