Instructions / Assembly

1-888-QUIETCOOL
5
7. Set the dip switch
positions inside the Hub
as shown in the diagram
below.
8. Power-on the Hub. The
Power LED indicator will
be lit.
9. Press the Test button to
make sure the fan works.
The Test LED indicator
will blink once every
two seconds indicating
1-speed and the fan will
be on. Press the Test
button again and the fan
should shut off and the LED will be off.
10. If the fan doesn’t operate as described in step 9, please check the dip switch postion.
Two Speed Wiring (see Figure B)
1. Using a wire nut, connect the black wire from the power cord to the black wire from the
Hub.
2. Connect the white wire from the power cord and the white wire on the fan to the white
wire from the Hub.
3. Connect the black wire
from the fan to the blue
wire on the Hub
4. Connect the red wire from
the fan to the red wire on
the Hub
5. Cap the yellow wire from
the Hub.
6. Ground the green wire
from the fan and the green
wire from the power cord
to the ground screw in the
Hub.
7. Set the dip switch positions inside the Hub as shown in the Figure B.
Power
Cord
Attach green ground wires to ground screw
All White Common Wires Together
POWER TIMER
PAIR TEST
Set dip switches:
1 - ON
2 - OFF
3 - OFF
ON
1 2 3
Power
Cord
Attach green ground wires to ground screw
All White Common Wires Together
POWER TIMER
PAIR TEST
Set dip switches:
1 - ON
2 - OFF
3 - OFF
ON
1 2 3
Figure A
Power
Cord
Attach green ground wires to ground screw
All White Common Wires Together
POWER TIMER
PAIR TEST
Set dip switches:
1 - OFF
2 - ON
3 - OFF
ON
1 2 3
Power
Cord
Attach green ground wires to ground screw
All White Common Wires Together
POWER TIMER
PAIR TEST
Set dip switches:
1 - OFF
2 - ON
3 - OFF
ON
1 2 3
Figure B