Instructions / Assembly

QUIETCOOLSYSTEMS.COM 15
WELCOME
INSTALLATION
WIRING OPERATION
WARRANTY
3.3 PAIRING THE WALL SWITCH
1. Using a at-head screwdriver, remove the front cover off the wall switch.
2. Install the included AAA batteries into the switch. All the LED indicators will light up
indicating that the switch has power. Replace the front cover.
3. Press and hold the Pair button on the Hub. The Pair LED indicator will be on for three
seconds then turn off. This clears all previous pairings out of the Hub,
4. Press the Pair button on the Hub twice. The Pair LED indicator will blink once every second
indicating the Hub is in pairing mode.
POWER TIMER
PAIR TEST
POWER INDICATOR
• The Power LED
indicator will always
be lit when the Hub
is connected to
Power.
• If this LED is not lit,
check the power
source
TIMER INDICATOR
• The Timer LED
indicator will light up as
shown below:
• 1 Hour: 1 Blink
• 2 Hours: 2 Blinks
• 4 Hours: 4 Blinks
• 8 Hours: 8 Blinks
• 12 Hours: 12 Blinks
• Continuous On: Off
TEST INDICATOR
• The Test LED indicator will light
up as shown below when the
Test button is pressed and when
the fan is turned on via the Wall
Switch:
• High Speed: LED indicator will
blink three times every two
seconds
• Medium Speed: LED indicator
will blink twice every two
seconds
• Low Speed: LED indicator
will blink once every
two seconds
PAIR INDICATOR
• The Pair LED indicator will
light up when making pair
operations. Please see
below for details on pairing.
NOTES ON OPERATION
• If the Dip Switch is not congured correctly, all the indicators on the Hub will stay solid
when the Hub is powered on. Please switch off power and re-congure the Dip Switch as
shown in Figure 3.1A on pg. 11.
3.2 FAN HUB LED INDICATORS