Instructions / Assembly

1-888-QUIETCOOL 16

3.5 INSTALLING THE WALL SWITCH

1. Using your hands, slide the Wall Switch off the

mounting plate.

2. If you have an existing Wall Switch with a junction

box installed, install the mounting plate over the junction

box using the oblong holes on the mounting plate. Make

sure you install the mounting plate with the arrow

facing upwards.

3. If you do not have an existing junction box, simply

install the mounting plate to the drywall. Using the

included drywall anchors and screws, mount the plate

onto the drywall through the four mounting holes.

1 2 4 8 12

5. Press either one of the buttons on the Wall Switch to wake it up. Now hold one of the

buttons on the switch. The Pair LED indicator on the Hub will go out and the Wall Switch

speed indicators will be blinking indicating successful pairing. Press the Wall Switch button

again, the speed indicators will go out, and it will display the current fan status.

Press the Timer button to test the Wall Switch to make sure it is communicating with

the Hub.

NOTE: You can connect up to 20 switches to a single hub.

NOTE: If a button on the Wall Switch is not pressed within three minutes of pressing the

Pair button on the Hub, the LED indicator on the Hub will go out, indicating unsuccessful

pairing. You will need to go back and repeat steps 4 and 5.

3.4 FINDING A LOCATION FOR THE WALL SWITCH

1. It is very important to nd the correct location to install the Wall Switch that will allow

the Wall Switch to communicate with the Hub.

2. Find the location you would like to install the Wall Switch and test that it properly

communicates with the fan to turn the fan on and off.

3. If the fan comes on, this is a good location.

4. If all the LED indicators turn on, the Wall Switch is not communicating with the Hub

and you will need to nd a location closer to the fan.