Full Product Manual

150 Callender Road
Watertown, CT 06795
www.ShelterLogic.com
1-888-288-2345
Hybrid Backpack Canopy 6 x 6 ft.
How to set up your canopy:
Remove the canopy from the backpack and stand it
up so the feet are on the ground (gure A).
Pull opposite corners away from each other to
expand canopy (gure B & C).
Slide brackets in all four corners up, until the pull-pins
snap in place (gure D & E).
Drape the canopy top over the frame and attach
hook and loop fasteners on canopy top to those on
frame (gure F & G).
Extend canopy legs to desired height (gure H).
Wrap half-wall straps around legs below push-pins to
keep wall taught (gure I).
How to take down your canopy:
Release and push in all canopy legs to their lowest
positions (gure J).
Detach canopy top from frame and fold it neatly, so it will
easily t into backpack. Do not place in bag yet (gure K).
Use the pull-pins at the corners to release corner brackets
and loosen eave tension (gure L).
With all pull-pins released, pick up and walk one corner of
canopy towards the opposite corner (gure M).
Fully compress frame so it will t easily into the bag.
Slide canopy frame back into canopy backpack, add in
the canopy top and (gure N).
WHERE DO YOU GO ??