SDS

ONE SECURITIES CENTRE, 3490 PIEDMONT ROAD, SUITE 1300, ATLANTA, GA 30305 SDS J4 TEL [phone] WWW.QUIKRETE.COM
Page 5 of 15
Free Isocyanates 101-68-8 Chem Rec TWA:0.005 ppm,STEL: 0.02ppm
p,p’-Methylenebis(phenyl 101-68-8 ACGIH TWA: 0.005 ppm
isocyanate)
OSHA CEIL: 0.2 mg/m
3
(0.02 ppm)
Xylene 1330-20-7 ACGIH TWA: 100 ppm, STEL: 150 ppm
Chem Rec TWA: 50 ppm, STEL: 75 ppm
OSHA TWA: 435 mg/m
3
(100 ppm)
Titanium Dioxide 13463-67-7 ACGIH TWA: 5 mg/m
3
(resp)
Chem Rec TWA: 15 mg/m
3
(total dust)
OSHA TWA: 15 mg/m
3
(total dust)
Poly (Vinyl Chloride) 9002-86-2 ACGIH TWA: 1 mg/m
3
(resp)
ACGIH: American Conference of Governmental Industrial Hygienists
Chem Rec: Chemical manufacturer’s Recommended Guidelines
OSHA: US Dept. of Labor – Occupational Safety & Health Administration
TWA: Time-Weighted Average
STEL: Short Term Exposure Limit
CEIL: Ceiling
8.2 Exposure Controls
Use ventilation adequate to keep exposures below recommended exposure limits.
8.3 General protective and hygienic measures
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated
clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
8.3a Personal protective equipment
Eye/face protection
Select and use eye/face protection to prevent contact based on the results of an exposure
assessment. The following eye/face protection(s) are recommended:
Indirect Vented Goggles
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin
contact based on the results of an exposure assessment. Selection should be based on use factors
such as exposure levels, concentration of the substance or mixture, frequency and duration, physical
challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate
compatible gloves/protective clothing. Gloves made from the following material(s) are
recommended: Butyl Rubber