SDS

QUIKRETE
®
MATERIAL SAFETY DATA SHEET page # 2
Product Name: C
HEMICALLY HYDRATED LIME MSDS H
Eye and skin contact: Flush eyes with a large amount of water for at least 15 minutes. See a physician if irritation
persists. Wash affected skin areas with soap and water.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Rubber protection gloves are recommended. Use safety goggles when splash potential exists.
If material is released or spilled, dam up to limit spreading. Mop up or absorb on inert material and place in containers.
If spill occurs in enclosed area, ventilate. Polymer may be separated from water by addition of alum and ferric chloride.
Note: Spilled emulsion is very slippery. Use care to avoid falls. Latex will leave a film on drying. Remove saturated
clothing and wash contacted skin areas with soap and water.
Waste Disposal: For large quantities, place in settling pond and add ferric chloride and lime. Decant water. Dispose of
solids in landfill. Emulsion can be incinerated directly under appropriate conditions.
SECTION VIII - CONTROL MEASURES
Normal cleanliness should be observed. Store in a cool place, avoid freezing.
NOTE: The information and recommendations contained herein are based upon data believed to be correct. However,
no guarantee or warranty of any kind, express or implied, is made with respect to the information contained
herein.