MSDS QuinCip-D

Material Safety Data Sheet
QUIN-CIP-D, #115468
Quincy Compressor
701 N. Dobson Ave
Bay Minette, AL 36507
1-217-222-7700 Page |
2
MSDS #115468
5
Fire Fighting Measures
Flash Point
260 °C, 500 °F ASTM D 92 (Typical)
Extinguishing Media
CO2, dry chemical, or foam. Water can be used to cool and protect exposed material. Water
can be used to cool and protect exposed material.
Firefighting
Procedures
Wear full protective fire gear including self-containing breathing apparatus operated in the
positive pressure mode with full face piece
, coat, pants, gloves and boots. Use water to cool
containers exposed to fire.
Unusual Fire &
Explosion Hazards
Closed containers may explode on heating.
See section 10 for additional information
.
6
Accidental Release Measures
Spill Procedures
Personal Protective Equipment must be worn, see Personal Protection Section for PPE
recommendations. Take precautions to avoid release to the environment. Ventilate area if
spilled in confined space or other poorly ventilated areas. Prevent entry into sewers and
waterways, dispose of in accordance with all federal, state and local environmental
regulation. Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed
on inert material.
7
Handling and Storage
Pumping Temperature
Not determined.
Maximum Handling
Temperature
Not determined.
Handling Procedures
Keep containers closed when not in use. Do not discharge into drains or the environment;
dispose in an authorized waste collection point. Use appropriate containment to avoid
environmental contamination. Do not breathe dust, fume, gas, mist, vapors or spray. Use
only outdoors or in a well-ventilated area. Wash thoroughly after handling. Contaminated
work clothing should not be allowed out of the workplace. Launder contaminated clothing
before reuse. Empty container contains product residue which may exhibit hazards of
product. Do not eat, drink or smoke when using this product. Dispose of packaging or
containers in accordance with local, regional, national and international regulations.
Maximum Storage
Temperature
Not determined.
Storage Procedures
Take precautions to avoid release to the environment. Store in dry, well ventilated place
away from sources of heat and direct sunlight. Store locked up.
See section 10 for
incompatible materials.
Maximum Loading
Temperature
Not determined.
8
Exposure Controls/Personal Protection
Exposure Limits
Comp
Exposure Guidelines
OSHA
ACGIH
Other
TWA
STEL
TWA
STEL
TWA
STEL
Aniline
5 ppm (s)
N/E
2 ppm (s)
N/E
N/E
N/E
(s) - Skin exposure
(p) - Proposed limit
(c) - Ceiling exposure
(l) - Recommended exposure limit
(u) - Supplier recommended exposure limit