Product Manual

ENGLISH
Cod. 9828093309 00 - Edition 05/2019 - 13
CABLES, PLUGS AND ALL OTHER TYPE OF ELECTRIC MATERIAL USED FOR THE CONNECTION MUST BE
SUITABLE FOR THE USE AND COMPLYING WITH THE REQUIREMENTS STATED BY THE REGULATIONS IN
FORCE.
12.3 CONNECTION TO THE COMPRESSED AIR NETWORK
Fit a manual interception valve Ref. 1 between the machine and the compressed air network so that the compressor
may be isolated during maintenance operations; (see figure 13 ) .
PIPES, FITTINGS AND CONNECTIONS USED FOR THE CONNECTION OF THE ELECTROCOMPRESSOR TO THE
COMPRESSED AIR NETWORK MUST BE SUITABLE TO THE USE ACCORDING TO THE PRESCRIPTIONS OF
THE REGULATIONS IN FORCE IN THE COUNTRY OF USE.
ALL DAMAGE DUE TO THE FAILURE TO COMPLY WITH THESE INDICATIONS CANNOT BE ATTRIBUTED TO
THE MANUFACTURER AND MAY CAUSE INVALIDITY OF THE GUARANTEE CONDITIONS.
The manual drainage Ref. 2 Fig. 13 the condensate automatic Ref. 3 Fig. 13, are led outside the machine with a flexible
pipe that may be inspected. Drainage must comply with the local regulations in force.
ALL DAMAGE DUE TO THE FAILURE TO COMPLY WITH THESE INDICATIONS CANNOT BE ATTRIBUTED TO
THE MANUFACTURER AND MAY CAUSE INVALIDITY OF THE GUARANTEE CONDITIONS.
12.4 STARTING UP
See part B of this manual, Chpter 20.0
FIG. 13
1
2
3
1
2
ALWAYS USE A
FLEXIBLE PIPE
1
THE COMPRESSOR MUST BE CONNECTED TO A TANK
COMPLETE WITH SAFETY VALVE (CAT. “IV” P.E.D. 97/23).