Product Manual

ENGLISH
Cod. 9828093309 00 - Edition 05/2019 - 23
- Stop the machine, (See pag. 17).
- Press the button switch Rif. 2 Fig. 19
- Turn on the differential supply switch, Ref. 3 (on the screw-compressor) and Ref. 4 (on the dryer) Fig. 19.
- Remove pressure from the dryer and tank by opening the condensation outlet valve Ref. 11 Fig. 19.
- Remove the stopper Ref. 9 Fig. 19
- Remove the filter Ref. 10 Fig. 19
- Clean the filter Ref. 10 Fig. 19 with a jet of air, working from inside to outside.
- Install the filter, fix the plug.
16.0 PERIODS OF INACTIVITY
If the machine has to remain inactive for a long period:
- Close the tap Ref. 1 and Ref. 2 Fig. 20.
- Stop the machine, (See pag. 17).
- Press the button switch Rif. 5 Fig. 20 (on the dryer if fitted)
- Turn on the differential supply switch, Ref. 6 (on the screw-compressor) and Ref. 7 (on the dryer if fitted) Fig. 20.
- Remove pressure from the dryer and tank by opening the condensation outlet valve Ref. 8 Fig. 20.
- Close the taps Rif. 8 Fig. 20 off again after discharging all the residual air pressure.
During periods of inactivity the weather must be protected against atmospheric agents, dust and humidity which could
damage the motor and the electrical system.
To restart the machine after periods of inactivity, consult the manufacturer.
17.0 SCRAPPING THE UNIT
If the machine is to be scrapped, it must be dismantled into parts of the same material, to be disposed of according to
the local regulations in force.
ALWAYS RESPECT THE REGULATIONS IN FORCE FOR DISPOSING OF OLD OIL AND
OTHER POLLUTING MATERIALS SUCH AS SOUND-DEADENING, INSULATING FOAM, ETC.
FIG. 20
2
8
6
6
7
1
5
8
3
1
6