Owner`s manual

Page 43
4600/4400 PT/CL CONSOLE DIAGNOSTIC TESTS
Contact Heart Rate Test (4600/4400 PT/CL only)
The contact heart rate system is made up of the console and the contact heart
rate handles. You can test each component by performing the following steps:
1. While the console is in the ATTRACT mode (noted by a simulated EKG
signal in the console display), or at the SELECT A WORKOUT prompt,
press [+INCREASE], [1], [0], [8], [ENTER].
2. After approximately ten seconds a flashing should be displayed in
the console text bar. Your heart rate, in beats per minute, will show next
to the heart icon. If the heart icon does not show, or if your heart rate is
not displayed in the text bar, you have a problem with either the
console or the contact heart rate handles.
3. If possible, replace or exchange your console with a console (from
the same type of machine) you know is working and retest the
machine.
4. If possible, replace or exchange your contact heart rate handles with
handles (from the same type of machine) that you know is working and
retest the machine.
5. If you do not have spare parts contact the Customer Service Department
at 800-331-3578.
Polar
®
Heart Rate Test (4600/4400 PT/CL only)
The Polar heart rate system is made up of the console, the heart rate receiver,
and the chest strap (available separately). You can test each component by
performing the following steps:
1. You will need to put a chest strap on in order to test the Polar heart
rate. Before you put the chest strap on, wet the two contact patches.
Secure the chest strap as high under your pectoral muscles (chest) as
is comfortable. The chest strap should fit snugly, comfortably, and
allow normal breathing.