FRM Series IC Card Reader Technical Manual （QFM100、QFM200、FRM300） 2012. 07 Quick Ohm Küpper & Co. GmbH Cronenfelder Straße 75 42349 Wuppertal www.quio-rfid.de kontakt@quio-rfid.
QU-CD-720-RFID-HF Series HF Card reader Technical Manual Content 1. Overview .............................................................................................................................................................. 3 1.1 Model and Differences................................................................................................................................... 3 1.2 Electric Characteristics ....................................................................................
QU-CD-720-RFID-HF Series HF Card reader Technical Manual 1. Overview QFM Series non-contact reader use 13.56MHZ RF technology and low power radio station MFRC522 is embedded, so user do not worry the complexity of RF base station control. You just need to send command to achieve full operation for card by a simple selected UART interface. This serial reader support Mifare 1 S50, S70 and compatible cards. 1.
QU-CD-720-RFID-HF Series HF Card reader Technical Manual Data format in a frame: 1start bit, 8 data bits, no parity check bit, 1 stop bit.
QU-CD-720-RFID-HF Series HF Card reader Technical Manual working mode Correct Return of the module Error Return 2 3 4 6 7 0X3A 0X46 Correct Return 0X46 Error Return 0X46 Dispatch 0X47 1 byte bcnt (Explanation: bcnt=0x04) 0X47 4 bytes Card Serial Number Anti-collision Correct Return Select Card 1 byte seek card model model=0x26: seek the card that does not enter into a dormant state model=0x52: seek the card in all states 2 bytes TagType (type value of the return card) pTagType：0x0400 = M
QU-CD-720-RFID-HF Series HF Card reader Technical Manual Dispatch 0X4D Correct Return 0X4D Error Return 0X4D Dispatch 0X4E 1 byte absolute block number Explanation: S50 Block No.(0~63); S70 Block No.
QU-CD-720-RFID-HF Series HF Card reader Technical Manual Error Return 17 0X05 Dispatch 0X6A Correct Return 0X6A Error Return 0X6A LED Indicator Light and Buzzer Control 1 byte LED light or Buzzer Control Word 0: Indicator Light off and LED pin output high level 1: Turn off Buzzer 2: Turn on Buzzer 3: Turn on indicator light, LED pin output low level 子科- 2.3 Command Example 2.3.
QU-CD-720-RFID-HF Series HF Card reader Technical Manual 〖Receive Data:〗02 00 00 13 4B 00 00 00 00 00 00 00 FF 07 80 69 FF FF FF FF FF FF 47 03 Write Sector 0 Block 1, write block 1 to 1: 〖Send Data:〗02 00 00 0B 4A 60 01 FF FF FF FF FF FF B0 03 〖Receive Data:〗02 00 00 10 03 4A 00 4D 03 〖Send Data:〗02 00 00 14 4C 01 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 71 03 〖Receive Data:〗02 00 00 10 03 4C 00 4F 03 Initialize Sector 0 Block 1 to Purse, original value 100: 〖Send Data:〗02 00 00 0B 4A 60 01 FF FF FF
