USER MANUAL QU-CM-5510/-2 QU-CM-5510/-2 MOTORIZEDCARD READER MODULE Page 1 of 9
USER MANUAL QU-CM-5510/-2 USER MANUAL Ⅰ.BRIEF INTRODUCTION It is the first dual shutter protection card reader in the world. The first shutter is mechanical with dust and foreign things prevention function, and the other one is for motor protection. The main body is composite plastic with high temperature, abrasion and aging resistance, and two sides of card movement channel are embedded with stainless steel metal. It makes product with advancement in strength and precision.
USER MANUAL QU-CM-5510/-2 Ⅱ. FEATURES & SPECIFICATIONS Subject Specification Magnetic card Reading IC card Reading & Writing Accordance with ISO7810 EMV、7816 PBOC 3.
USER MANUAL QU-CM-5510/-2 Ⅳ.INTERFACE EXPLANATION AND CONNECTION NOTE: TO AVOID sudden high power damage, please do connect the communication wire before connect the Power cable. 4 PIN 3 PIN 3PIN 4 PIN RS232 Communication Interface DC12V POWER Interface Rear of the Machine RS232 Interface DB9 to computer serial port 3PIN RS232 Socket The other port of theMachine Rear T RS232 Cable RS232-ZIP TO PC RS232 CABLE TO 3PIN CONN.
USER MANUAL QU-CM-5510/-2 Power supply interface POWER CABEL TO MACHINE POWER SOCKET TO DC12V POWER POWER-ZIP PIN-NO. INPUT REQUIREMENT PIN 2&3 （Black Wire） GND Connect with Ground PIN 1&4（Red Wire） VCC DC12V Current over 1.
USER MANUAL QU-CM-5510/-2 Page 5 of 9
USER MANUAL QU-CM-5510/-2 Ⅴ.
USER MANUAL QU-CM-5510/-2 Ⅵ.OPERATION GUIDE CARD INSERTION NOTE: Magnetic card: The magnetic area under the right side of the card, as picture indicated Contact IC card: Hold the card, the chip IC at the front of the card to insert, as picture indicated. Non-contact IC card: Both side and direction is available for reading and writing.
USER MANUAL QU-CM-5510/-2 Ⅶ.
USER MANUAL QU-CM-5510/-2 Ⅷ.CAUTION DURING OPERATION 1) When connecting interface, please connect with communication interface first, then power interface. And then power on. 2) To make your product safe, the input voltage please not above 40V. 3) Please set BPS rate correct. EX-work set is 9600bps. 4) During operation, card insert direction should be correct a) When inserting magnetic card, magnetic stripe should face down and insert on the right side. b) When inserting IC card, chip should face up.
QU-CM-5510/-2 Ⅸ.Mantainace 1. Transmitter maintenance a) Select “Check transmitter status” in “card reader control command screen”. b) In normal condition, information of 5 transmitters in text box will all show “No card”. c) If one or several transmitters show “Have card”, maybe they are covered with dirt. d) Should disassembly card reader and clean it. drawing”. 2. Magnetic head maintenance Use cleaning card to clean magnetic head in card reader. 3.
