Instructions

ManualsBrandsQUIO ManualsChip & Card TechnologyChip card reader

MIFARE&ISO14443&ISO15693COMPATIBLEUSB PC/SC INTERFACE RFID READER

Compatible PC/SC Series

IC Card Reader

General Technical Manual

(Revision 2.38)

Quick-Ohm Küpper & Co. GmbH

February 20, 2021

Please read this manual carefully before using. If any problem, please feel free to contact us, we will

offer satisfied answer ASAP.

Summary of content (72 pages)

PAGE 1
MIFARE&ISO14443&ISO15693COMPATIBLEUSB PC/SC INTERFACE RFID READER Compatible PC/SC Series IC Card Reader General Technical Manual (Revision 2.38) Quick-Ohm Küpper & Co. GmbH February 20, 2021 Please read this manual carefully before using. If any problem, please feel free to contact us, we will offer satisfied answer ASAP.
PAGE 2
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Contents Document update records................................................................................................................................5 1 Introduction.............................................................................................................................................6 2 Device Installation...............................................................................................
PAGE 3
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.14 SRIX Serial Cards 16 Slots Initiate Card .............................................................................29 4.3.15 SR Serial Cards Select..........................................................................................................30 4.3.16 ISO15693 Inventory.............................................................................................................31 4.3.17 ISO15693 Stay Quiet .
PAGE 4
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER 5 www.quio-rfid.de 4.3.51 Read Data from FLASH.......................................................................................................58 4.3.52 Write Data into FLASH .......................................................................................................59 4.3.53 Get Device SNR...................................................................................................................59 4.3.
PAGE 5
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Document update records Revision Date Revision 2.30 July. 6, 2018 Revision 2.32 Aug.1,2018 Update information Support MR880 Add chapter 4.2.4 and 4.3.51 Fix chapter4.3.41 and 4.3.42 Fix the extension command list Revision 2.38 Jan.28,2021 Add SR176/SRIX label instruction introduction Fix Sam card instruction introduction Document formatting Copyright © 2003-2021 Quick-Ohm Küpper & Co. GmbH. All rights reserved.
PAGE 6
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 1 Introduction These series RFID Readers are the USB PC/SC interfaces. If the first time to connect with PC in Windows System, you need install the PC/SC CCID driver. The PC/SC interface adopts Win System itself building in driver and API, so the development work is easy. Here we mentioned compatible USB PC/SC has a little bit of difference with the standard USB PC/SC interface.
PAGE 7
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 2.2 ATRGeneration According to ISO 14443 Part 3 PICCs, if the reader detects a PICC, an ATR will be sent to the PCSC driver for identifying the PICC.In order to compatible with more types of contactless IC cards, the MR800 adopts getting the regularATR (without card information), so the return ATR format is like the following: ByteNo.
PAGE 8
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 3 APDU Description There are two types of APDUformats for PC/SC CompatibleReaders: Standard APDU format (the Class in APDU is not 0xFF) and Non-Standard APDU format (the Class in APDU is 0xFF).In order to be compatible with the PC/SC standard, for Contactless Smart Cards and Contact SAM cards, we can directly send standard APDU commands to them except the Get_Data command that is to get the Card Reset information.
PAGE 9
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4 Non - Standard APDU Commands 4.1 Common Error Code Definition Get_Data APDUcommand is suitable for Contactless Smart Cards, SAM Cards and Contactless Storage Cards. But other Non - Standard APDU Commands are mainly suitable for Contactless Storage Cards. Standard APDU Commands are mainly suitable for Contactless Smart Cards and SAM Cards.
PAGE 10
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 11
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 12
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de The containers can be located in volatile or non-volatile memory.
PAGE 13
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.2.3 Authentication The application provides the number of the key used for the MIFARE 1K/4K card authentication. The specific key must be already in the reader.Two typeauthentication keys: TYPE_A and TYPE_B. Load Authentication Keys APDU Format: Command CLA INS P1 P2 P3 Data Authentication 0xFF 0x88 High Address Low Address KeyType KeyConfig+Key P1/P2: For MIFARE S50/70, this is the Block Address.
PAGE 14
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.de 0xFF B0 00 01 10 Receive: 0x11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 90 00 AT88F020 CardRequest, and to read the Data Block9 Send: 0xFF CA 23 00 00 Receive: 0x50 00 04 E8 51 00 00 00 00 00 00 41 90 00 Send: 0xFF 88 00 00 00 08 00 00 00 00 00 00 00 00 Receive: 0x90 00 Send: 0xFF B0 00 09 08 Receive: 0x00 00 00 00 00 00 00 00 90 00 4.2.
PAGE 15
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.
PAGE 16
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER • MIFARE 1K/4K 16 bytes • MIFARE Plus 16 bytes {In Level3, Support Multi-Block Read} • MIFARE Ultra light 4 bytes/Block, 4Blocks each time, total 16bytes • SR176 2 bytes • SR512 2 bytes • SRIX4K 2 bytes • AT88RF020 8 bytes • ISO15693 Tag 4 bytes {Support Multi-Block Read} www.quio-rfid.de This APDU command support Muti-Block read, but the Card itself also must support Muti-Block read.
PAGE 17
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 18
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.
PAGE 19
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Receive: 0x00 3D 3D 08 17 00 01 04 E0 90 00 Send: 0xFF D6 00 0A 04 00 01 02 03 Receive: 0x90 00 Send: 0xFF B0 00 0A 04 Receive: 0x00 01 02 03 90 00 4.2.7 ValueBlockOperation This command increments the value of a data object if the card supports this functionality.
PAGE 20
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 21
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.de 0xFF 88 40 00 00 10 FF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Receive: 0x90 00 Send: 0xFF D7 00 01 05 00 00 00 00 01 Receive: 0x90 00 Send: 0xFF B1 00 01 04 Receive: 0x00 00 00 01 90 00 Send: 0xFF D7 00 01 05 01 00 00 00 02 Receive: 0x90 00 Send: 0xFF B1 00 01 04 Receive: 0x00 00 00 03 90 00 Send: 0xFF D7 00 01 05 02 00 00 00 01 Receive: 0x90 00 Send: 0xFF B1 00 01 04 Receive: 0x00 00 00 02 90 00 4.2.
PAGE 22
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Receive: 0x90 00 Send: 0xFF B1 00 02 04 Receive: 0x00 00 00 01 90 00 4.3 Non-Standard APDU(Custom) Non-Standard APDU (Custom) is the extension of Non-Standard APDU function in PC/SC Part3.The Commands are mainly the extension for FF (INS = 00) Command. Our Non-Standard APDU (Custom) Commands extension functions include "SwitchCurrent Operation Smart Card ", "LCD Display", and "Beep/LED Control".
PAGE 23
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 24
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 25
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de RequestMode: REQA (0x26) WUPA (0x52) Answer: Response Data Out Result SW1 SW2 4.3.2 ISO14443A Card Halt Set the current operating ISO14443A card into halt status. APDU Format: Command Class INS P1 P2 Le Halt A FF 00 00 01 00 Answer: Response Data Out Result SW1 SW2 4.3.3 MIFARE PlusSwitch Level0 to Level1/3 After the Level 0 initialization finished, to switch Level0 to Level1 or Level3.
PAGE 26
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de RequestMode: REQB (0x00) WUPB (0x01) Answer: Response Data Out Result SW1 SW2 4.3.5 Halt Type_B Set the current operating ISO14443B card into halt status. APDU Format: Command Class INS P1 P2 Lc Data Halt B FF 00 20 01 04 PUPI PUPI (8 bytes):for Type_B Answer: Response Data Out Result SW1 SW2 4.3.
PAGE 27
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.8 AT88F020Lock APDU Format: Command Class INS P1 P2 Lc Data AT88F020Lock FF 00 23 02 04 LockData Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 28
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Example: Send: 0xFF CA 21 00 00 Receive: 0xEE 93 39 E9 0F 08 92 D0 02 90 00 Send: 0xFF 00 30 00 01 EF Receive: 0x90 00 //read 0x0F block（1Byte Lock_REG + 4Bits Reserved + 4Bits CID） Send: 0xFF B0 00 0F 02 Receive: 0xEF EE 90 00 Send: 0xFF D6 00 07 02 77 77 Receive: 0x63 00 Send: 0xFF B0 00 08 02 Receive: 0xAA AA 90 00 Send: 0xFF D6 00 08 02 88 88 Receive: 0x90 00 Send: 0xFF B0 00 08 02 Receive: 0x88 88 90 00 4.3.
PAGE 29
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.12SRIX Serial Cards Return to Inventory APDU Format: Command Class INS P1 P2 Lc ReturntoInventory FF 00 30 12 00 Answer: Response Data Out Result SW1 SW2 4.3.13SR Serial Cards Completion The selected SRIX series card switches to the deactivated state.
PAGE 30
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de APDU Format: Command Class INS P1 P2 Le Pcall16 FF 00 30 14 0x20 Answer: Response Data Out Result Status CardID SW1 SW2 Status: 16Bytes, slot0~15result. 0x00:success; 0xE8:collision; 0xFF:NoCard. Card ID: 16Bytes, Card IDs for 16 slots. The ID is only valid if the execution result of the current slot is successful. 4.3.15SR Serial Cards Select Select the card by ID.
PAGE 31
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.16ISO15693 Inventory There are two ways to obtain the Tag UID. It contains "GetData command" and "Single&Multi TagDetect by sendingAPDU command". As toTag numbers depend on the antenna RF capability. Note that: This command has the same function with "GetData APDU command". Using this APDU command, the working mode will be automatically switched to ISO15693.
PAGE 32
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 33
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER 09h Bit6~Bit5=01b 8Bytes Random 09h Bit6~Bit5=10b 8Bytes UID www.quio-rfid.de Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 34
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Len and Flag example： Len Flag UID 备注 06h Bit6~Bit5=01b NULL New firmware support 0Eh Bit6~Bit5=01b 8Bytes Random 0Eh Bit6~Bit5=10b 8Bytes UID Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 35
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de UID: Tag UID(8Byte, optional) Len and Flag example： Len Flag UID 备注 01h Bit6~Bit5=01b NULL New firmware support 09h Bit6~Bit5=01b 8Bytes Random 09h Bit6~Bit5=10b 8Bytes UID Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 36
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Len Flag UID 备注 01h Bit6~Bit5=01b NULL New firmware support 09h Bit6~Bit5=01b 8Bytes Random 09h Bit6~Bit5=10b 8Bytes UID Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 37
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Len and Flag example： Len Flag UID 备注 03h Bit6~Bit5=01b NULL New firmware support 0Bh Bit6~Bit5=01b 8Bytes Random 0Bh Bit6~Bit5=10b 8Bytes UID Answer: Response Result Data Out BlockSecSta * Num SW1 SW2 4.3.
PAGE 38
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 39
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 40
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de WriteBlock 0Ah Send: 0xFF 00 40 05 06 12 0A FF FF FF FF Receive: 0x90 00 Read Block 0Ah Send: 0xFF 00 40 04 03 12 0A 01 Receive: 0xFF FF FF FF 90 00 4.3.29Set SAM Baud Rate (Set PPS) This function is aim to set SAM Baud Rate. The SAM card slots which can be supported by each reader are different. (MR800 supports 2 SAM cards).
PAGE 41
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.30Automatically Set SAM Baud Rate (Set PPS) This function is aim to according to SAM Reset Information (ATR) parameters in the automatic set of SAM baudrate.Default is not enable. This parameter is set to save when power is off. APDU Format: Command Class INS P1 P2 Lc Data AutoSetBaud FF 00 60 14 01 Status Status: 0x00: disenable 0x01: enable Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 42
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de APDU Format 2(Recommended): Command Class INS P1 P2 Lc Data SetSamBaud FF 00 60 11 02 SAMn+Baudrate SAMn: 0x00 - SAM1 SetPPS 0x01 - SAM2 SetPPS 0x02 - SAM3 SetPPS 0x03 - SAM4 SetPPS Baudrate: 0x00 - 9600(Default) 0x01 - 19200 0x02 - 38400 0x03 - 55800 0x04 - 57600 0x05 - 115200 0x06 - 230400 Answer: Response Data Out Result SW1 SW2 4.3.
PAGE 43
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 0x06 - 230400 4.3.33Current Operating Smart Card Switch This function is aim to switch between SmartCard and SAM card. Except "CardRequest" and "Reset" commands by using non-standard APDU (GetData) commands, the rest commands all use Standard APDU commands. In order to distinguish the current operation Card is a SmartCard or SAM card, you can use this command to know it.
PAGE 44
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Example: To operate the SmartCard and SAM card at the same time, the detailsas following: Initialization when Power On: Reset SAM1 card when power on. Send APDU {GetData(SAM)} command; if success, SAM1 is the current operating Card. In this situation, all of the sending Standard APDU commands will be sent to it.
PAGE 45
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.34RTC Initialization This function is aim to do initialization for theInternal Clock of the Reader. If the time need be kept when power off, the readerneed be equipped with battery. Readers are required to support RTC.
PAGE 46
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.36RTC TimeDisplay This function is aim to set the display time format on LCD. If the time need be kept when power off, the readerneed be equipped with battery.
PAGE 47
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Example: Date Display OFF Send: 0xFF 00 FB 03 03 00 00 00 Receive: 0x90 00 Date Display ON Send: 0xFF 00 FB 03 03 01 03 05 Receive: 0x90 00 4.3.38Set The Date Display Format MR88x special instruction. APDU Format: Command Class INS P1 P2 Lc Data DateFormat FF 00 FB 04 01 USdateformat Usdateformat: 0x00 : YYYY-MM-DD(Default) 0x01 : MM-DD-YYYY Answer: Response Result Data Out SW1 SW2 4.3.
PAGE 48
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Example: Send: 0xFF 00 FC 00 01 01 Receive: 0x90 00 4.3.40Read Display Character Set Setting Read display character set setting. APDU Format: Command Class INS P1 P2 Le Display Font FF 00 FC 01 01 Answer: Response Data Out Result SW1 CharacterSet SW2 Example: Send: 0xFF 00 FC 00 01 02 Receive: 0x90 00 Send: 0xFF 00 FC 01 01 Receive: 0x02 90 00 4.3.
PAGE 49
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.42LCD Display Character String This function is aim to set the specified number of characters (including English and/or Chinese, Russian) on LCD.
PAGE 50
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de showing new information on the screen, no any delete the old ones" and"BackLight off" . Send: 0xFF 00 FC 02 09 00 00 00 BD F0 C4 BE D3 EA Receive: 0x90 00 4.3.43LCD Display Character String at Any Point MR88x special instruction. This function is aim to set the specified number of characterson LCD at ANY POINT.
PAGE 51
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.44Display Picture on LCD(Directly send picture data) This function is aim to display the specified size picture. If the showing picture is large, it needs several times to be displayed.
PAGE 52
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Command Class INS P1 P2 Lc Data EraseLCD FF 00 FC 04 01 Row Row（1Row = 8 dot High）: "Bit0 ~ Bit7" means 0 to 7 rows. (0-keep, 1- delete) Answer: Response Result Data Out SW1 SW2 Example: Delete the whole rows on the LCD Send: 0xFF 00 FC 04 01 FF Receive: 0x90 00 4.3.46Delete Row on LCD MR88x special instruction.
PAGE 53
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 54
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 55
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 56
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.48Set Standby Screen on LCD This function is aim to set the standby screen. If no setting, after finished the User's interface display, it won't return to the standby screen. All pictureswill be stored in FLASH AT45DB321/AT45DB641.
PAGE 57
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Before the StandbyScreen Enable, the Screen picture data need be written into the Flash SaveAddr via "FlashWrite APDU" command. If the picture is larger than 512 bytes, the extra bytes will be written into the following block. The image dimension = Width*High As to how to operate, please refer to the SDK for "Set Boot Screen on LCD", but notice the storage address in FLASH. 4.3.
PAGE 58
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de clear the row of the showed screen Before showing new information on the screen, delete 10 B3 B7~B4 the all old ones 0 BackLight off 1 BackLight on RFU RFU DisAddr:the savedAddress in the Flash; LSB first.
PAGE 59
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.de 0xFF 00 FD 00 06 00 02 00 02 00 02 Receive: 0x18 08 90 00 4.3.52Write Data into FLASH The Flash on MR801/MR811 is AT45DB321 (MR881 isAT45DB641).From address0 to address1302, these are used to store the fonts (MR881 is address0 to address10359), so please don't read or write them.
PAGE 60
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Command Class INS P1 P2 Le GetVer FF 00 FF 01 04 SW1 SW2 Answer: Data Out Response Result HandwareVer（2Byte）+ Software Ver（2Byte） Example: Send: 0xFF 00 FF 01 04 Receive: 0x01 00 02 02 90 00 4.3.
PAGE 61
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER Send: www.quio-rfid.de 0xFF 00 FF 02 05 F0 0F 0F0F 02 Receive: 0x90 00 Red twinkles two times. And then light ON Send: 0xFF 00 FF 02 05 11 01 0F 0F 02 Receive: 0x90 00 Yellow twinkles, and then Red is ON. This state will be executed two times. Send: 0xFF 00 FF 02 05 81 09 0F 0F 02 Receive: 0x90 00 4.3.
PAGE 62
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 0x01 - Open Answer: Response Data Out Result SW1 SW2 Example: Close Antenna Send: 0xFF 00 FF 04 01 00 Receive: 0x90 00 4.3.58Set Card Encryption Mode APDU Format: Command Class INS P1 P2 Lc Data EncrMode FF 00 FF 05 01 EncryptMode EncryptMode: 0x00-Philips 0x01-Shanghai Standard Answer: Response Data Out Result SW1 SW2 Example: Set Shanghai Encryption Mode Send: 0xFF 00 FF 05 01 01 Receive: 0x90 00 4.3.
PAGE 63
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 4.3.60System Reboot APDU Format: Command Class INS P1 P2 Le Reboot FF 00 FF 07 00 Answer: Response Data Out Result SW1 SW2 Example: Send: 0xFF 00 FF 07 00 Receive: 0x90 00 4.3.61Direct RF Transaction Send data stream over RF interface to card and receive the data.
PAGE 64
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 65
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 5.1 Smart Contact Card and Contactless Card For Smart Contact Card and Contactless Card operation, you can directly send standard APDU commands.
PAGE 66
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de 5.2 Memory Cards Memory Cards' operations are both by sending Non-Standard APDU commands.
PAGE 67
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de MIFARE S50/70 Operation Detect the Specified Card Type APDU: GetData Card Authentication APDU: Authentication Read Card Write Card APDU: ReadBinaryBlock APDU: WriteBinaryBlock PurseInitialize, Decrement, Increment Read Purse APDU: ValueBlockOperation APDU: ReadValueBlock The above operations are no SAM card operation. If with SAM card operation, please refer to the above relevant operations.
PAGE 68
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de ISO15693Tag Operation Detect the Specified ISO15693 Tag APDU: GetData Read Card Read Card APDU: ReadBinaryBlock APDU: WriteBinaryBlock WriteAFI LockAFI APDU: WriteAFI APDU: LockAFI Write DSFID Lock DSFID APDU: Write DSFID APDU: Lock DSFID Theoperationsfor ISO15693 Tag are via "ReadBinaryBlock" and "WriteBinaryBlock" APDU commands. It's just suitablefor the last detected one Tag.
PAGE 69
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.
PAGE 70
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Level 3 Operation: Detect the Specified Card APDU: GetData (Level3) Card Authentication APDU: Authentication (AES Key) Read Card Write Card APDU: ReadBinaryBlock APDU: WriteBinaryBlock PurseInitialize, Decrement, Increment Read Purse APDU: ValueBlockOperation APDU: ReadValueBlock The operations for other Type Cards are similar. The basic APDU commands contain GetData, ReadBinaryBlock, WriteBinaryBlock and etc.
PAGE 71
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.de Appendix A For the Data and Key storage structures, there are some difference between MifarePlus Level3 and M one.
PAGE 72
MIFARE & ISO14443&ISO15693 USB PC/SCRFID READER WRITER www.quio-rfid.