Instructions

Baud Rate:：9600BPS
Sync Bit：None
Data Bit:：8
Stop Bit ：1
In RS232- TTL module output interface, it has 12 ASCII
codes,01 in the first ,02 in the last ,10 card numbers are
in the middle.
For example:
HEX: 01(first) 30 31 30 39 33 36 36 37 32 35 02(last)
ASCII: 01(first) 0 0 1 0 9 3 6 7 2 5 02(last)
The card inner code:
HEX:84C2A6E195
A6E195(HEX) = 10936725(decimal)
RS232 Connection is as follows:
Red Wire: Connecting Power Positive Side
Black Wire: Connecting Power Negative Side
Blue Wire: Connecting Feet 2 of the 9 PIN Serial Port. And Serial Port 5 should also connect Negative
Power side.
Computer Setting
Computer Start – Programs – Accessories – Communications – Hyper Terminal. (First Choice: COM
Port 1.)
Baud Rate: 9600.
Data Bit: 8.
Stop Bit: 1.
Parity check: No. OK.
Email:
[e-mail] web: http://www.quio-rfid.de/
Quick-Ohm Küpper & Co. GmbH | Cronenfelderstraße. 75 | 42349 Wuppertal | Tel: [phone] | Fax: [phone]
QU-J10LF-2