870 Integration guide
Chapter 1 Introduction 1.1 Product Overview nals, 870is a embedded design 2d bar code reader for all kinds of kiosk, self-service and ticketing termi such as: Ticket vending machines; Access control gates & turnstiles; Transportation (ticketing of bus, metro...); Loyalty cards; Car park ticket machines. TM 870performs excellent for bar code reading both from cell phone screen and paper.
User Environment Operating Temperature: -40°C to 70°C Storage Temperature: 50°C to 85°C Humidity: 0% to 95%, non-condensing Drop/Shock Specifications: Withstands 1.2m drops Ambient Light Immunity: 0 to 100,000 lux 1.2 Illumination The 870has one white LED (6500K) for supplementary lighting, making it possible to scan barcodes even in complete darkness.The illumination can be programmed On or Off.
Chapter 2 Installation 2.1 General Requirements Dust and Dirt The 870with enclosed design which protect itself from dust and dirt, and with its special design which makes it cover in the surface of the kiosks without gaps, this perfectly prevent dust and dirt come into the kiosk machine. Eye Safety The 870has LEDs what create the illumination beams. These LEDs are bright, but testing has been done to demonstrate that the engine is safe for its intended application under normal usage conditions.
Front View (unit: mm) Left View (unit: mm) Bottom View (unit: mm) 4
Reference for mounting 5
Chapter 4 Interfaces 4.3 Communication Interfaces The 870can communicate with the host device through either RS232 serial port or USB port. RS232: This DB9 RS232 interface is applicable to most system.
USB HID-KBW: Based on USBconnection,the RT870’s transmission issimulated as USB keyboard input. It works on a Plug and Play basis and no driver is required. USB COM Port Emulation: The USB port on the host device is emulated as a serial port with the same data transmission and configuration as a real serial port. A driver is required.