User's Manual


NOTE:
Your home’s wiring
may differ; please
consult an electrician.
8 Double-check
to confirm wiring
is correct.
9 Place Tapt assembly
into wall and mount
using the mounting
screws from the
existing switch.
10 Attach your existing
faceplate or use the
included faceplate.
To use the included
faceplate:
• Attach the snap plate
to the outlet assembly
with 2 screws.
• Snap the faceplate
onto the snap plate.
11 Turn on power at
the circuit breaker.

R-INS-TAPT-WH01.indd 18-19 2014/10/23 下午 02:26:42