Users Manual

The adhesive strip may cause discoloration on certain surfaces, or leave adhesive resi
dues after removal.
8.5 Testing the IR return function
Once you have connected the IR cable according to the above description, it is
recommended to test the function first.
Aim your remote control towards the IR On the front side of receiver and
send a command.
The IR Receiver will now send this command to the transmitter through the
receiver.
The transmitter will forward this command to the IR on the transmitter. The IR
then forwards the command to the HDMI source.
The HDMI source should now execute the function associated with the comma
nd sent by your remote control.
8.6 Connecting the USB extension