User guide

ManualsBrandsQuoizel ManualsLightingADM8701IB Admiral

Part Description

Quantity

A Crossbar

1pc.

2pcs.

HexNut

LockWasher

PackageContents

Quoizel,Inc.

6CorporateParkway

GooseCreek,SC

29445

CustomerService

Phone631.273.2700

Fax631.231.7102

www.quoizel.com

WarningsandCautions

Turnoffelectricityatcircuitbreakerormainfuseboxbeforeinstallation.Consultalicensedelectricianifindoubt.

Theseinstructionsareprovidedforyoursafety.Itisveryimportantyoureadthemcompletelybeforeinstalling

thefixture.Westronglyrecommendthatalicensed,professionalelectricianperformtheinstallation.

Disconnectfixturefrompowersourcebeforereplacingbulbs.Makesurebulbsaregivensufficienttimetocool

beforeremoval.Donotsubjectglasspartstoanyshockwhileinoperationorshatteringmayresult.

ThankyouforpurchasingaQuoizelproduct.

Needassistancewithpartsorassembly?CallQuoizelcustomerserviceat1-631-273-2700

orvisituson-lineatwww.quoizel.com

2013QuoizelInc.

MountingScrew

AssemblyInstructionSheet#IS-ADM8701IB

ForStyleADM8701IB

1of5

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wire

strippers,electricaltape,safetyglasses.

6CORPORATEPARKWAY

GOOSECREEKSC29445

wwwquoizelcom

1pc.

2pcs.

LockBall

FixtureBody

1pc.

Shade

Bulb

1pc.

SocketCollar

October2013

EstimatedAssemblyTime:20-30minutes

Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage

contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing

ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer

serviceforreplacementparts.

BulbRecommended: (1)MediumBaseDecorativeFilament60Wbulb(provided),

Maximum100W.

Summary of content (5 pages)

PAGE 1
Assembly Instruction Sheet #IS-ADM8701IB For Style ADM8701IB 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Bulb Recommended: (1) Medium Base Decorative Filament 60W bulb (provided), Maximum 100W.
PAGE 2
ADM8701IB FINISH: IMPERIAL BRONZE 2.4mm 13Ga QUOIZEL R GND 6” 1 10” 1” 2 10” Dia. 11.5” (1)Medium Base Decorative Filament 60W bulb (provided), Maximum 100W. NO. PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. 1 G3697SH CLEAR GLASS SHADE 10.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-ADM8701IB For Style ADM8701IB STEP 1 - Attach Mounting Screws, Lock Washers and Hex Nuts to Crossbar A. Line up a set of holes on the Crossbar (A) and Holes on the Backplate of the Fixture Body (F). B. Thread Mounting Screws (B) into the holes on the Crossbar (A), pass Lock Washers (C) and thread Hex Nut (D) onto the Mounting Screws (B). Hand tighten until snug.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-ADM8701IB For Style ADM8701IB STEP 3 - Make Wire Connections A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors. B. Connect White Supply Wire from the Outlet Box to White Wire from fixture. C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture. D.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-ADM8701IB For Style ADM8701IB STEP 5 - Attach Shade to Fixture Body A. Place Shade (H) over the Socket, secure by thread the Socket Collar (I) to Socket. Tighten until snug. Socket Shade Steel Collar STEP 6 - Install Bulb Figure 6 Figure 7 A. This fixture uses standard bulb 60W (supplied) with a standard screw base. Maximum 100 watts. B. Insert bulb and screw properly into place.