Installation Guide

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
7of9
Assembly Instruction Sheet #IS-ADS2818DC
For Style ADS2818DC
STEP 9 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (F) and slide Canopy Lock
Ring (F) and Ceiling Canopy (H) down the Fixture Chain (G).
B. Push all slack fixture wire through Canopy Chain Loop (E)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (H) as shown in Step 6.
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Supply Wire
and Ground
Wire from
Outlet Box
Ceiling
Canopy
Canopy Lock Ring
White wire from supply
Ribbed Side Wire
from fixture
Black wire from supply
(or Red)
Smooth Side Wire
from fixture
Ground wire from supply Ground wire from fixture
Figure 9
Figure 10
STEP 10 - Attach Glass Panel A
A. Place the Glass Panel A (Q) into the bottom of the Cage
(S). Fold the Tabs in the bottom of the Cage (S) to
engage Glass Panel A (Q).
Glass
Panel A
Cage
Tab
Figure 11
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
December2014
Rev.A