Installation Guide

Package Contents
Assembly Instruction Sheet #IS-ARC8602_R1
For Style ARC8602CLED
B
Lock
Screw
x4
Inner Backplate
x1
STEP 1 Install Inner Backplate and Fixture Body-
A. Pass the supply wires through Inner Backplate (A). Attach Inner
Backplate (A) to Outlet Box with the head of Green Ground Screw
facing you. Secure it with Outlet Box Screws (not included). Tighten
until snug
B. Refer to Step 2 for wiring connections.
C. Attach Fixture Body (D) over Inner Backplate (A) and secure with
Lock Screws (B). Tighten until snug with screwdrivers.
.
A
D
Fixture
Body
x1
A
Figure 1
Outlet Box
Outlet Box
Screw
D
B
C
F
E
Socket
Figure 3
E
Shade
x2
Pleasegoto forproductcleaningtips.Gotothe selection.
(2)LEDG94.5WBulbs
PleasegotoQuoizel.comtoseetheG9LEDbulbspecificationsprovidedwithyourfixture.
www.quoizel.com Care+Maintenance
LightSource:
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
EstimatedAssemblyTime:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires between Inner Backplate (A) and
Fixture Body (D).
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
STEP 3 - Install Shades and Bulbs
A. Place Shade (E) over Socket and secure with Socket Collar (F).
B.
Your fixture is now assembled and ready to use. Enjoy!
Install either the G9 Xenon bulb as specified (not provided) or install
the G9 LED bulbs (provided) if the fixture purchased is the LED
model.
This fixture is rated to use 60W maximum G9 Xenon bulbs.
You may use a lower wattage G9 Xenon or if you purchased the LED
model it is supplied with G9 LED bulbs.
Note:
F
Socket
Collar
x2
LED G9 Bulb
x2
C
1of2
2016 QuoizelInc.
RevisedDate:2016-06-08
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com