Installation Sheet

ManualsBrandsQuoizel ManualsPendantsQuoizel Barlow 4 Light 20" Wide Pendant with a Inner and Outer Glass Shades

1of3

Assembly Instruction Sheet #IS-BAW1820PK

For Style BAW1820PK

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Package Contents

Pleasegoto forproductcleaningtips.Gotothe selection.

(4)B10CandelabraBaseBulbs60WMaximum.

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssemblyTime:

Preparation:

ToolsRequired: Flathead screwdriver,Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

2017 QuoizelInc.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

Fixture Loop

Assembly

ReleasedDate:2017-09-12

Fixture Body

Fixture Canopy

with Rod

Side Rod

Rod

Lock Screw

Glass

Shade

Glass

Holder

Glass Panel

Cage

STEP 1 Install Glass Panels-

A. Place the Cage (J) onto a flat working surface with the bottom edge

on the top. Carefully insert the narrow edge of Glass Panel (I) into

the slot of the Cage (J). Attach the Glass Panel (I) to the Cage (J)

and secure by folding the tabs in the bottom edge of the Cage (J) to

the Glass Panel (I).

B. Repeat the process to complete the installation of other Glass

Panels (I).

Bottom

Edge

Figure 1

Tab

Slot

STEP 2 Install Fixture Canopy

with Rod, Rod and Fixture Body

together

A. Thread the Fixture Canopy with

Rod (B), the Rod (C) and the

Fixture Body (F) together as

shown. Hand tighten until snug.

Figure 2

Hardware Contents

Crossbar

Assembly

Ceiling

Canopy

Fixture Chain

Quick Link

Summary of content (3 pages)

PAGE 1
Assembly Instruction Sheet #IS-BAW1820PK For Style BAW1820PK 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (4) B10 Candelabra Base Bulbs 60W Maximum.
PAGE 2
STEP 3 - Install Fixture Loop Assembly, Side Rods and Cage STEP 5 - Install the Fixture Chain and Ceiling Canopy A. Attach the top end of the Side Rod (G) to the side hole on the fixture canopy and secure with Lock Screws (H). Hand tighten until snug. B. Place the tab at the bottom end of the Side Rod (G) under the tab on the top edge of the Cage (J). Place the Lock Screw (H) through the hole on the top edge of the Cage (J) and thread it into the tab on the bottom end of the Side Rod (G).
PAGE 3
STEP 7 - Install Glass Holders, Bulbs and Glass Shades A. Place Glass Holders (E) over sockets with the opening on the top. B. Insert bulbs onto sockets and screw snugly into place. C. Place Glass Shade (D) over bulbs onto Glass Holders (E). D Your fixture is now assembled and ready to use. Enjoy! Bulb (not supplied) E Figure 7 Socket Bobeche NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" BAW1820PK FINISH: POLISHED NICKEL 5.5" Dia.