Installation Guide

1of2
Assembly Instruction Sheet #IS-BCN1716WT
For Style BCN1716WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
A
Crossbar Assembly
x1
STEP 1 Install Crossbar Assembly-
A. Pass the supply wires through the Crossbar
Assembly (A). Attach the Crossbar
Assembly (A) to the Outlet Box with the
head of the Green Ground Screw facing
you. Secure it with Outlet Box Screws (not
included). Tighten until snug.
August2015
STEP 2 Fit Ceiling Canopy to
Crossbar Assembly
-
A.
eiling canopy of the Socket
Assembly to the
ceiling
Remove mounting balls from the
Crossbar Assembly (A). Fit the
c
(B) Crossbar
Assembly (A) and secure with
mounting balls. Note: The
should be snug against the
and the mounting balls. If
Not, adjust the length of the nipple
on the Crossbar Assembly (A) by
unscrewing the preassembled hex
nut and lock washer and then
screwing the mounting screws in
ceiling
canopy of the Socket Assembly
(B)
or out of the crossbar until the correct length is achieved. Once the
is secure, remove the
mounting ball and Socket Assembly (B) and proceed to Step 3.
ceiling canopy of the Socket Assembly (B)
Package Contents
Mounting Screw
Hex Nut and
Lock Washer
B
A
Mounting Ball
STEP 3 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
White wire
from fixture
Black wire
from fixture
Ground wire
from fixture
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
Outlet
Box
Pleasegoto forproduct cleaningtips. Goto the selection.
(3)A19MediumBase 100WMaximum.AlternateBulbs (3)23W CFL.
30-45minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flathead screwdriver,Phillips screwdriver,pliers, wirecutters, wirestrippers, electricaltape, safetyglasses.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
B
Socket
Assembly
x1
C
Side Arm
x3
D
Shade
x1
E
Cage
x1
Figure 1
Figure 2
A
Figure 3
STEP 4 Install Fixture Body-
A. Carefully tuck all wires into the
outlet box and position the ceiling
canopy of the Socket Assembly
(B) over the outlet box. Align the
holes in the ceiling canopy of the
Socket Assembly (B) with the
mounting screws, then attach the
ceiling canopy using the
previously removed mounting
balls. Hand tighten until snug.
Mounting
Screw
B
A
Mounting
Ball
Figure 4
STEP 5 Assemble Shade, Cage and Bulbs-
A. Place the Shade (D) inside of the Cage (E).
B. Attach one ends of Side Arms (C) to Hooks on the side of the Socket
D
E
C
B
Hook
Hook
Bulb
Socket
Assembly (B). Lift the Cage with
Shade upward and attach another
ends of Side Arms (C) to Hooks
on the top edge of the Cage (E).
Carefully release your hands
after all Side Arms (C) are hung
properly.
C. This fixture uses standard bulb
with standard screw base.
Maximum 100 watts. Insert bulb
and screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 5