Installation Sheet

ManualsBrandsQuoizel ManualsPendantsQuoizel Bardstown 3 Light 10" Wide Outdoor Pendant

1of3

For Style BDS1910AGV

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Pleasegoto forproductcleaningtips.Gotothe selection.

(3)B10CandelabraBaseBulbs60WMaximum,CandelabraBaseT8Vintage Bulbs are recommended, bulbs not included.

MinimumHangingHeightis25.75”,MaximumHangingHeightis121.75”.

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

FixtureHangingHeight:

EstimatedAssemblyTime:

Preparation:

ToolsRequired: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Installation Guide #IS-BDS1910AGV

2018 QuoizelInc.

ReleasedDate:2018-09-18

visit us on-line at www.quoizel.com

Package Contents

Fixture Loop

Hardware Contents

Crossbar

Assembly

Ceiling

Canopy

Fixture Chain

Quick Link

Fixture Body

Glass Panel

Figure 2

STEP 3 Install Cage with Glass Panels and Fixture Loop-

A. Place the cage over the sockets. Align the tabs in the top edge of

the cage to the tabs in the fixture hood. Secure by threading

previously removed lock screws back onto the tabs and hand

tighten until snug with screwdrivers.

B. Thread the Fixture Loop (A) onto the top end of the Fixture Body (C)

and hand tighten until snug.

Tab

Figure 3

STEP 1 Remove the Cage from the

Fixture Body

A. By using screwdrivers, unscrew lock

screws in the top edge of the cage

and remove the cage from the Fixture

Body (C).

Figure 1

Lock Screw

Cage

STEP 2 - Install Glass Panel

A. Insert the Glass Panel (B) into the slot

in the bottom edge of the cage and

press the tabs on the top edge of the

cage onto the top edge of the Glass

Panel (B) to secure it.

Slot

Tab

Cage

Lock Screw

Cage

Socket

Summary of content (3 pages)

PAGE 1
Installation Guide #IS-BDS1910AGV For Style BDS1910AGV Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (3) B10 Candelabra Base Bulbs 60W Maximum, Candelabra Base T8 Vintage Bulbs are recommended, bulbs not included. Fixture Hanging Height: Minimum Hanging Height is 25.75”, Maximum Hanging Height is 121.75”.
PAGE 2
STEP 4 - Install the Crossbar Assembly to Outlet Box and Adjust the length of the Nipple STEP 6 - Making the Wire Connections A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head of the Green Ground Screw facing you. Secure it with Outlet Box Screws (not included), tighten until snug . B. Adjust the hex nut and lock washer underside of the crossbar to the middle of the nipple. C. Remove the canopy lock ring from the canopy chain loop.
PAGE 3
BDS1910AGV FINISH: AGED VERDE NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" 5.25” SQ. 121.75” 20.5” 10” SQ. 2018 QuoizelInc. visit us on-line at www.quoizel.