Installation Guide

Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-BRD8410MB
For Style BRD8410MB
2016 QuoizelInc.
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2016-09-13
Pleasegoto forproductcleaningtips.Gotothe selection.
(1)A21MediumBasebulb150WMaximumor
(1)MediumBaseVintagebulbisrecommendedbutnotsupplied.
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
Fixturecanonlybemountedinthedirectionindicatedonpage2.
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Package Contents
B
Lock
Screw
x2
Inner Backplate
x1
STEP 1 Install Inner Backplate and
Fixture Body
-
A. Pass the supply wires through Inner
Backplate (A). Attach Inner
Backplate (A) to Outlet Box with the
head of Green Ground Screw facing
you. Secure it with Outlet Box Screws
(not included). Tighten until snug
B.RefertoStep2forwiring
connections.
C. Attach Fixture Body (D) over Inner
Backplate (A) and secure with Lock
Screws (B). Tighten until snug with
screwdrivers.
.
A
Fixture Body
x1
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
D
Figure 1
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires between Inner Backplate (A) and
Fixture Body (D).
C
Lock Ball
x2
Glass
x1
E
Cage
x1
F
B
Outlet Box
A
Outlet Box
Screw
D
STEP 3 - Install Bulb, Shade
and Cage
A. Insert bulb into socket and
screw snugly into place.
B. Thread the Shade (E) onto
the Fixture Hood of Fixture
Body (D). Hand tighten
until sung.
C. Pass Bolts on the top end
of the Cage (F) through
holes on the Fixture Hood
of Fixture Body (D). Secure
by threading Lock Balls (C)
onto Bolts. Hand tighten
until sung.
Figure 3
C
E
F
Socket
Fixture
Hood
Figure 4
STEP 4 - Apply Silicone
Sealer
A. Make sure exterior wall
surface and fixture
backplate are free of dirt
before applying caulk.
Using exterior grade caulk,
caulk over top of backplate
and down other side. Do
not caulk bottom of fixture
backplate to ensure proper
moisture drainage.
Your fixture is now
assembled and ready to
use. Enjoy!
Exterior
Grade
Caulk
Backplate
Vintage Bulb
(recommended
but not supplied)