Installation Guide

ManualsBrandsQuoizel ManualsOutdoor Wall LightsBRE8407K

Package Contents

Warnings and Cautions

1of2

Assembly Instruction Sheet #IS-BRE8407K

For Style BRE8407K

2017 QuoizelInc.

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Crossbar Assembly

Pleasegoto forproductcleaningtips.Gotothe selection.

(1)A19MediumBasebulb100WMaximum.

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssembly Time:

Preparation:

Fixturecanonlybemountedinthedirectionindicatedonpage2.

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.

Fixture Body

ReleasedDate:2017-03-09

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

Alternate

Mounting screw

Small

Glass Panel

Big Glass Panel

Figure 1

STEP 1 Separate the Cage-

A. Unlock lock balls and remove the

cage from the fixture hood.

Fixture Hood

Lock Ball

Cage

STEP 2 Install Small Glass Panels-

A. Insert the Small Glass Panel (D) into the fixture hood. Place the

narrow side of the Small Glass Panel (D) into the slot in the fixture

hood. Fold the tabs in the fixture hood to another side of the Small

Glass Panel (D) to engage it.

Fixture Hood

Tab

Slot

Figure 2

STEP 3 Install Big Glass Panels-

A. Insert the Big Glass Panel (E) into

the cage. Place the narrow side of

the Big Glass Panel (E) into the

slot in the bottom edge of the cage.

Fold the tabs in the top edge of the

cage to the top side of the Big

Glass Panel (E) to engage it.

Tab

Cage

Figure 3

Slot

STEP 4 Install the Bulb-

A. Insert the bulb onto socket and

screw snugly into place.

Bulb (not

Supplied)

Socket

Figure 4

STEP 5 Install the Cage-

A. Place the cage back onto the fixture

hood with the gap against the

backplate. Secure them with lock

balls and hand tighten until snug.

Figure 5

Fixture

Hood

Lock Ball

Cage

Gap

Backplate

Summary of content (2 pages)

PAGE 1
Assembly Instruction Sheet #IS-BRE8407K For Style BRE8407K Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Light Source: (1) A19 Medium Base bulb 100W Maximum. Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation.
PAGE 2
STEP 6 - Installing the Crossbar Assembly STEP 9 - Install the Fixture Body A. Pass the supply wires through the Crossbar Assembly (A). Attach the Crossbar Assembly (A) to the Outlet Box with the head of the Green Ground Screw facing you. Secure the Crossbar Assembly (A) with Outlet Box Screws (not included). Tighten until snug . Note: Use the Alternate Shorter Mounting Screw (B) if your installation requires a shorter mounting screw.