Installation Guide

ManualsBrandsQuoizel ManualsOutdoor Wall LightsBRN8408IB

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing

the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool

before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

Assembly Instruction Sheet #IS-BRN8408IB

For Style BRN8408IB

1of5

ToolsRequired:Flathead screwdriver,Phillips screwdriver,pliers,wire cutters,wire

strippers,electrical tape,safety glasses.

EstimatedAssemblyTime:20-30minutes

Preparation:Identify andinspect allpartsbefore beginninginstallation. Checkpackage

contentlist anddiagrams belowtobe sureall partsarepresent. Ifany partsaremissing

ordamaged, donot attempttoassemble, install,or operatethefixture. Contactcustomer

servicefor replacementparts.

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

Package Contents

Part

Description

Quantity

A Inner Backplate

1pc.

2 pcs.

Fixture Body

Mounting Screw

2012 Quoizel Inc.

1pc.

Edson Bulb

BulbRecommended: (1) EdsonBulb60W Maximum

October2012

Summary of content (5 pages)

PAGE 1
Assembly Instruction Sheet #IS-BRN8408IB For Style BRN8408IB 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
BRN8408IB FINISH: IMPERIAL BRONZE 8” 2 7” 6.5” 4 6.5” 14.5” 9” 3 1 5.5” 8” (1)60W Edson Bulb (Supplied) NO. PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BRN8408IB For Style BRN8408IB STEP 1 - Attach Inner Backplate to Outlet Box Outlet Box Mounting Hole A. Attach the Inner Backplate (A) to Outlet Box and secure by threading Outlet Box Screws (not supplied) into the Mounting Holes on the Outlet Box. Tighten until snug. Outlet Box Screw Inner Backplate Figure 1 STEP 2 - Make Wire Connections A. Use standard wire connectors to make all wire connections.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BRN8408IB For Style BRN8408IB STEP 3 - Attach Fixture Body to Inner Backplate A. Place the backplate of the Fixture Body (C) onto the Inner Backplate (A). Line up holes on both of them. Thread Mounting Screws (B) into the mounting holes on the Inner Backplate (A) and hand tighten until snug to secure them. Mounting Screw Figure 4 Mounting Hole Inner Backplate Backplate STEP 4 - Install Bulb A.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-BRN8408IB For Style BRN8408IB STEP 5 - Apply Silicone Sealer to Mounting Screws A. To prevent moisture from entering the wire compartment, apply a small amount of silicone sealer (not included) to the threaded side of the mounting Screws (B) and then install them onto the mounting Hole on the side of inner Backplate (A). Wipe off excess caulk. STEP 6 - Apply Silicone Sealer to Backplate A.