Installation Guide

ManualsBrandsQuoizel ManualsIndoor Ceiling FixturesBrockton 4 Light 18" Wide Semi-Flush Ceiling Fixture

Table Of Contents

1 of 5

2020 Quoizel Inc.

visit us on-line at www.quoizel.com

For Styles BRT1717GK, BRT2817BSR,

BRT2817GK and BRT1717BSR

Installation Guide

Light SourceTools Required

BULB BASE TYPE

Medium (E26)

BULB SHAPE

TYPE A

100W

MAX

4 BULBS REQUIRED

BULBS NOT INCLUDED

Warnings and Cautions

Turn off the electricity at the circuit breaker

before installation. Consult a licensed

electrician if in doubt about installation.

Turn off power to the fixture and allow the

bulbs to cool before replacing.

Crossbar Assembly

x 1

Package Contents

PARTS BAG

Fixture Body

x 1

Crossbar Assembly Fixture Chain

Ceiling Canopy

Bulb

Table of

Contents

Fixture Height Adjustable

12” to 67”

Fixture Chain

x 1

Ceiling Canopy

x 1

Quick Link

x 2

Preparation: Identify and inspect all parts

before beginning the installation.

Missing or damaged parts? Contact your

original place of purchase.

Wiring

Outlet Box Screw

x 2

Wire Connector

x 3

Released Date: 2020-03-01

STEP 3A STEP 4A STEP 6ASTEP 5ASTEP 2A

Fixture Loop Assembly

x 1

Assembly Instructions for

Chandelier Light

(Step 1A - Step 5A)

BRT2817GK, BRT2817BSR

Assembly Instructions for

Semi-flush Light

(Step 1B - Step 4B)

BRT1717GK, BRT1717BSR

Crossbar Assembly

Bulb

Wiring

STEP 2B STEP 4BSTEP 3BSTEP 1B

STEP 1A

Fixture Loop

Fixture Body

Summary of content (5 pages)

PAGE 1
Installation Guide For Styles BRT1717GK, BRT2817BSR, BRT2817GK and BRT1717BSR Tools Required Fixture Height Adjustable 12” to 67” Light Source 100W MAX Warnings and Cautions Turn off the electricity at the circuit breaker before installation. Consult a licensed electrician if in doubt about installation. Turn off power to the fixture and allow the bulbs to cool before replacing.
PAGE 2
STEP 1A 1 2 Remove lock ball and knurled nut Install fixture loop assembly STEP 2A 1 2 3 Step 2 - 3 Test fitting ceiling canopy to nipple Step 1 Install crossbar assembly STEP 3A 1 2 3 Step 2 - 3 Install Fixture Chain Step 1 Adjust fixture chain length L N L N Suggested Chain Length: 8’ ceiling: 16” Chain 9’ ceiling: 28” Chain 10’ ceiling: 40” Chain 2020 Quoizel Inc. visit us on-line at www.quoizel.
PAGE 3
STEP 4A 1 2 Step 1 Feed the fixture wires through the loop L White wire (neutral) from outlet box Supply wire from fixture ribbed side or identified with the Label “N” Black or Red wire (hot) from outlet box supply wire from fixture smooth side or identified with the label “L” N Bare or Green ground wire from outlet box Ground wire from Fixture *Green Ground Screw on crossbar optional STEP 5A STEP 6A 2020 Quoizel Inc. visit us on-line at www.quoizel.
PAGE 4
STEP 1B 1 2 Remove canopy chain loop, one lock washer and one hex nut Install crossbar assembly Test fitting ceiling canopy to nipple 4 Remove lock ball and knurled nut 3 STEP 2B 1 2 Step 1 Cut supply wires White wire (neutral) from outlet box Supply wire from fixture ribbed side or identified with the Label “N” Black or Red wire (hot) from outlet box supply wire from fixture smooth side or identified with the label “L” L N 10" Bare or Green ground wire from outlet box Ground wire from
PAGE 5
STEP 3B STEP 4B 2020 Quoizel Inc. visit us on-line at www.quoizel.