Installation Guide

G
ND
Warnings and Cautions
1of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
December2014
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Package Contents
A
B
Ceiling
Canopy
x1
Shade
x1
STEP 1 Install Crossbar-
..
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included) Tighten until snug
Figure 1
Outlet Box
Outlet Box Screw
(not included)
Green Ground Screw
AA
Hardware Contents
AA
Crossbar Assembly
x1
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
STEP 3 Attach Shade to Ceiling
Canopy
-
A. Thread Ceiling Canopy (A) onto
the Shade (B). Hand tighten
until snug.
Figure 3
A
E
F
G
C
Diffuser
x1
D
B
Hex Nut
x1
Finial
x1
Rubber
Washer
x1
Flat
Washer
x1
H
Lock Ball
x2
Pleasegoto forproduct cleaningtips. Goto the selection.
Flatheadscrewdriver,Phillipsscrewdriver,pliers,wire cutters,wire strippers,electrical tape,safety glasses.
(4)Medium Base100W Maximum,Alternatebulb(4) 23WCFL
30-45minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
ToolsRequired:
BulbRecommended:
EstimatedAssemblyTime:
Preparation:
Assembly Instruction Sheet #IS-CKCF1720
For Styles CKCF1720OS and CKCF1720RK
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 4 Attach Fixture Body to
Mounting Screw
-
A. Place the Ceiling Canopy (A)
over the Mounting Screws and
secure with Lock Ball (H). Hand
tighten until snug.
Figure 4
H
Mounting Screw
A
STEP 5 Attach Shade to fixture-
A. Place the Diffuser (C) , Rubber
Washer (D) and Flat Washer
(E)over the Center Stem,
secure with the Hex Nut (F).
Hand tighten until sung.
B. Thread the Finial (G) onto the
Center Stem, hand tighten until
sung.
Figure 5
B
C
D
E
F
G
Center Stem

Summary of content (2 pages)