Installation Guide

2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2016 QuoizelInc.
ReleaseDate:2016-03-30
STEP 7 continued
Repeat the steps of Rail Supports Installations to locate the rest Rail
Supports. Then Follow steps STEP 6 of Rail Installation to install the
Rail onto the other rail supports.
CMA1405WT/ CMA1405BN
FINISH: WESTERN BRONZE
BRUSHED NICKEL
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
PART NUMBER
G12764SH
G12768DE
REPLACEMENT PART
HEAD
RAIL SUPPORT
NO.
1
2
QTY.
5
5
STEP 6 Instal Rail to Rail Support
NOTE: The Shallow V-pit on the Rail is always facing to the
ceiling.
-
A. Carefully take out the Rail (D) from the package and unfold it. There
has an Indented Groove and Brass Strip in the side of the Rail (D).
B. Turn the Moveable Part of the Rail Support body up. Attach the Rail
(D), while making certain the indented groove are facing toward the
bump, securely into the Rail Support.
D. Close back the moveable part of Rail Support (C) over the rail, then
restore the Caps back to the Rail Support (C).
Brass Strip
Rail
Indented
Groove
Cap
Brass Strip
Rail
Support
Moveable part
of Rail Support
Figure 7
Figure 8
STEP 7 Instal Rail to Ceiling Canopy
Note: If the Adapter is not able to close around the Rail, turn Rail
around so Adapter fits properly.
CAUTION: To ensure the fixture works correctly, make sure the
connection between the Adapter and the Rail is correct.
-
A. Unscrew the Caps from the Rail Adapter, and then turn the Moveable
Part of the Rail Adapter body up.
B. Attach the Rail (D) onto the slot of the pre-tightened Rail Adapter.
C. Close back the Moveable Part of Rail Adaptor body over the Rail (D),
then restore the caps back to the rail adapter. Make certain that the
Brass Clips of the adapter are connected properly with the Brass
Strips of the Rail (D).
D. Shape the Rail (D) as your desired. Then mark and drill the desired
positions on the ceiling for the rest of the Rail Supports (C).
Cap
Brass Strip
Bump
Rail Adapter
Moveable Part
of Rail Adapter
B
D
Bump
Brass Clip
C
STEP 8 Spot Light Installation
CAUTION: To ensure the fixture works correctly, make sure the
connection between the adapter and the rail is correct. The
Shallow V-pit on the Rail is always facing to the ceiling.
Note: Adjust the spotlight head to a desired position by using
the swivel.
-
A. Choose one spot light, unscrews the Caps from the Rail Adapter of
Spot Light (E), then turn the Moveable Part of Rail Adapter body
down.
B. Attach the Rail Adapter of the Spot Light (E) onto the Rail (D). Close
back the Moveable Part of Rail Adaptor body over the Rail (D), then
restore the Caps back to the Rail Adapter. Make certain that the
Brass Clips of the Adapter are connected properly with the Brass
Strips of the Rail.
C. Follow steps A~B to install the other spot lights onto the rail.
Your fixture is now assembled and ready to use. Enjoy!
Rail
Cap
Rail
Adapter
Moveable Part
of Rail Adapter
Spot Light
Head
E
D
Indented
Groove
Shallow V-Pit
Rail Adapter
Rail
Brass
Strip
Rail
Brass Strip
Shallow V-Pit
Indented Groove
Rail Adapter
Brass Clip
Brass Clip
Figure 10
Figure 9
Figure 11
Figure 12
3.75”
3”
9.25”
1.75”
11.75”
108”
4.75”Dia.
ITEM NUMBER
1
2
CMA1405BN
G12763SH
G12767DE
HEAD
RAIL SUPPORT
1
2
5
5
CMA1405WT