Installation Guide

2of2
2017 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Socket
Bulb (not
Supplied)
Exterior
Grade Caulk
Backplate
Exterior
Grade
Caulk
ReleasedDate:2017-04-21
Figure 6
STEP 6 - Install the Bulb
and Apply Silicone Sealer
A. Insert the bulb onto socket
and screw snugly into
place.
B. Make sure the exterior
wall surface and fixture
backplate are free of dirt
before applying caulk.
Using exterior grade
caulk, caulk over top of
backplate and down both
sides. Do not caulk the
bottom of the fixture
backplate to ensure
proper moisture drainage.
Your fixture is now
assembled and ready to
use. Enjoy!
STEP 5 Install the
Fixture Body
-
A. Position the backplate
and Fixture Body (C)
onto the Crossbar
Assembly (A). Place the
holes in the backplate
over the mounting
screws or alternate short
mounting screws. Secure
the Fixture Body by using
the mounting balls and
hand tighten the
mounting balls until
snug.
Figure 5
HOW TO REPLACE GLASS PANELS
A. Unscrew lock screws on the
fixture hood by using
screwdrivers and remove the
cage with glass panels from
the fixture body.
B. Unscrew Allen screws from
the top edge of the cage and
remove the tabs. Replace the
broken glass panel with the
replacement and attach the
tabs back onto the top edge of
the cage and glass panel.
Secure by threading Allen
screws back onto the cage.
Tighten until snug with
screwdrivers.
C. Place the cage with glass
panels back onto the fixture
hood and secure with lock
screws. Tighten until snug.
G
ND
FINISH: PALLADIAN BRONZE
Fixture can
only be
mounted in
the direction
indicated
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
C
Mounting Ball
A
Backplate
Mounting Screw
or Alternate Short
Mounting Screw
Cage
Glass Panel
Tab
Allen Screw
Lock
Screw
Fixture Body
16.5”
9.5”
11.25”
9.75”
5.75”
9.75”
CPT8410PN