Installation Guide

Package Contents
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-DBN8603BN
For Style DBN8603BN
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Pleasegoto forproduct cleaningtips. Goto the selection.
(3)A19MediumBase bulbs100W Maximum,Alternatebulbs(3) 23WCFL.
20-30minutes
Identifyand inspectall partsbefore beginninginstallation. Checkpackage contentlist anddiagrams belowto besure allparts are
present.If anyparts aremissing ordamaged, donot attemptto assemble,install, oroperate thefixture. Contactcustomer servicefor replacement
parts.
www.quoizel.com Care+ Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver, pliers,wire cutters,wire strippers,electrical tape,safety glasses.
Fixture Body
x1
September2015
Shade
x3
Socket Collar
x3
A
C
B
Hardware Contents
AA
BB
CC
Crossbar
x1
Lock Washer
x2
Hex Nut
x2
DD
Mounting Screw
x2
EE
Mounting Ball
x2
FF
Alternate Short
Mounting screw
x2
STEP 1 - Attach Mounting Screws, Lock Washers and Hex Nuts to
Crossbar
A. Line up a set of holes on the Crossbar (AA) and Holes on the
Backplate of the Fixture Body (A). Thread Mounting Screws (DD) or
Alternate Shorter Mounting Screws (FF) into the holes on the
Crossbar (AA). Pass Lock Washers (BB) and thread Hex Nuts (CC)
onto the Mounting Screws (DD) or Alternate Shorter Mounting
Screws (FF). Hand tighten until snug.
Note: Use the Alternate Shorter Mounting Screw (B) if your
installation requires a shorter mounting screw.
Mounting Screw
or Alternate Short
Mounting Screw
AA
AA
BB
CC
Backplate
A
Figure 1
STEP 2 - Attach Crossbar to
Outlet Box
A. Pass the supply wires through
the Crossbar (AA). Attach the
Crossbar (AA) to the Outlet Box
with the head of the Green
Ground Screw facing you.
Secure it with Outlet Box Screws
(not included). Tighten until snug.
Outlet Box
Outlet Box
Screws (not
included)
AA
Figure 2
Supply Wires
with Ground
Wire
STEP 3 Fit Backplate to Crossbar Assembly-
A. on Fixture Body (A) to Mounting Screws (DD) or
Alternate Short Mounting Screws
Fit the backplate
(FF) and secure with Mounting
Mounting Screw
or Alternate Short
Mounting Screw
Figure 3
A
AA
Backplate
Hex Nut and
Lock Washer
(Step 3 Continued)
Balls (EE). Note: The
backplate
should be snug against the
wall and the Mounting Balls
(EE). If
on Fixture Body (A)
not, adjust the length
of the Mounting Screws (DD)
or Alternate Short Mounting
Screws (FF) by unscrewing
the Hex Nut (CC) and Lock
Washer (BB) and then
screwing Mounting Screws
(DD) or Alternate Short
EE
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 4
STEP 4 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
STEP 5 - Install Fixture Body
A. Carefully tuck all wires into the outlet box and position the backplate
of Fixture Body (A) over the outlet box. Align the holes in the
Mounting Screws (FF) in or out of the Crossbar (AA) until the correct
length is achieved. Once the backplate on Fixture Body (A) is secure,
remove the Mounting Ball (EE) and Fixture Body (A) and proceed to
Step 4.