Installation Guide

- of 2 -1

INSTALLATION GUIDE FOR DMN8405EK,

DMN8406EK and DMN8407EK

CARE AND MAINTENANCE

SAFETY INFORMATION

Released Date: 2021-08-12

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean ﬁxture as they may damage

the ﬁnish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at

www.quoizel.com.

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn oﬀ electricity at the circuit breaker box or the main fuse box.

• RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture.

CAUTION

• For your safety, read instructions completely before beginning installation.

• If in doubt about electrical installation, consult a licensed electrician.

• Turn oﬀ electricity to ﬁxture before replacing the bulb(s).

TOOLS REQUIRED

PACKAGE CONTENTS

Crossbar Assembly

Wire Connector

Outlet Box Screw

MOUNTING HARDWARE

Alternate

Mounting Screw

Fixture Body

x 1

Glass Shade

Socket Collar

[preassembled

on Fixture Body ]

PAGE 1
INSTALLATION GUIDE FOR DMN8405EK, DMN8406EK and DMN8407EK SAFETY INFORMATION Released Date: 2021-08-12 Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING • RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. • RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture.
PAGE 2
INSTALLATION 1 Install Crossbar Assembly Wiring 2 White wire from supply White from ﬁxture Black (or red) wire from supply Black from ﬁxture Ground wire from supply Ground wire from ﬁxture (2) Alternative Screws Green ground screw * Alternative screws are provided to replace pre-assembled mounting screws if necessary. 3 Install Fixture Body 5 Install Bulb Install Shades 4 6 * Note: Do NOT caulk the bottom of the backplate to allow moisture to escape.