Installation Sheet

ManualsBrandsQuoizel Manualspost lightsQuoizel DeSoto Single Light 21-1/2" High Outdoor Single Head Post Light with a Glass Shade

1of2

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

2017 QuoizelInc.

Pleasegoto forproductcleaningtips.Gotothe selection.

markingpen,1/16”

drillbit,centerpunch,hammer,drillandwrench.

(1)A21MediumBasebulb150WMaximum

or(1)MediumBaseVintageBulbisrecommendedbutnotsupplied.

www.quoizel.com Care+Maintenance

LightSource:

ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters, wire strippers, electrical tape, safety glasses,

EstimatedAssembly Time:

Preparation:

20-30minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement

parts.

Assembly Instruction Sheet #IS-DST9009PN

For Style DST9009PN

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184

or visit us on-line at www.quoizel.com

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Package Contents

Mounting Screw

Fixture Body

Glass

Shade

Cage

Figure 2

ReleasedDate:2017-08-10

Finial

Water Proof

Washer

Lock

Washer

Nipple

STEP 1 Install Finial-

A. Place the Lock Washer (D) onto

the Nipple (E). Place the nipple

with Lock washer inside of the

Cage (F) and pass the nipple

through the hole on the top center

of the Cage (F). Place the

Waterproof Washer (C) onto the

Nipple (E) and thread the Finial

(B) onto the Nipple (E). Hand

tighten until snug.

Figure 1

STEP 2 Install the Bulb, the Glass Shade and the Cage-

A. Remove lock screws from the bottom edge of the Cage (F).

B. Insert the bulb onto the socket and screw snugly into place.

C. Place the Glass Shade (G) and the Cage (F) onto the Fixture Body

(H) and align the mounting holes on the bottom edge of the Cage (F)

to the holes on the bar of the Fixture Body (H). Secure by threading

lock screws onto the Fixture Body (H) and the Cage (F). Hand

tighten until snug.

Lock Screw

Vintage Bulb

(recommended

but not Supplied)

Bar

Summary of content (2 pages)

PAGE 1
Assembly Instruction Sheet #IS-DST9009PN For Style DST9009PN 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses, marking pen, 1/16” drill bit, center punch, hammer, drill and wrench.
PAGE 2
STEP 3 - Mark the Location for the 3 Mounting Holes STEP 7 - Attach the fixture to the Post Mount A. Place the light fixture onto the post and mark the location of the 3 mounting holes on the fixture fitter onto the post with the marking pen. A. Place the fixture on the post lining up the mounting holes on the fixture fitter with the holes on the post. Use the Mounting Screws (A) to attach the fixture to the post. Your fixture is now assembled and ready to use.