Owner's manual

ManualsBrandsQuoizel ManualsLightingFE5004WT Ferndale

Quoizel,Inc.

6CorporateParkway

GooseCreek,SC

29445

Customer Service

Phone 631.273.2700

Fax 631.231.7102

www.quoizel.com

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

Assembly Instruction Sheet #IS-FE5004WT

For Style FE5004WT

1of8

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire

strippers, electrical tape, safety glasses.

Estimated Assembly Time: 20-30 minutes

Preparation: Identify and inspect all parts before beginning installation. Check package

content list and diagrams below to be sure all parts are present. If any parts are missing

or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer

service for replacement parts.

6 CORPORATE PARKWAY

GOOSE CREEK SC 29445

www quoizel com

, .

. .

Bulb Recommended: (4) Frosted G9 Halogen Bulbs 100W Maximum (Supplied)

Warnings and Cautions

Turnoffelectricityatcircuitbreakerormainfuseboxbeforeinstallation.Consultalicensedelectricianifindoubt.

Theseinstructionsareprovidedforyoursafety.Itisveryimportantyoureadthemcompletelybeforeinstalling

thefixture.Westronglyrecommendthatalicensed,professionalelectricianperformtheinstallation.

Disconnectfixturefrompowersourcebeforereplacingbulbs.Makesurebulbsaregivensufficienttimetocool

beforeremoval.Donotsubjectglasspartstoanyshockwhileinoperationorshatteringmayresult.

Donottouchthebulbwithbarehandsuseaclothorglove.

2013 QuoizelInc. April2013

Summary of content (8 pages)

PAGE 1
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
PAGE 2
FE5004WT FINISH: WESTERN BRONZE 2.4mm 13Ga QUOIZEL R GND 4 6” 5” Dia. 1” 59.5” OVERALL HEIGHT INCLUDES (2) 6” AND 12” RODS 3 12” 20” 7” x 5” 1 5” x 3” 2 4” 5” 26” (4)100W Frosted G9 Halogen Bulbs (Supplied) NO. PART NUMBER 1 15004WTFE 2 G3464SH 3 4 NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. BASE WESTERN BRONZE FE5004WT 1 CLEAR SEEDY GLASS AND INNER GLASS 4 9008EXWT ROD 0.63D 12” WESTERN BRONZE 2 9007EXWT ROD 0.
PAGE 3
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT Package Contents Part Description A Quantity A Crossbar 1 pc. B Mounting Screw 2 pcs. C Lock Washer 2 pcs. D Hex Nut 2 pcs. E Mounting Ball 2 pcs. F Ceiling Canopy with Loop 1 pc. G 6” Rod 2 pcs. D H 12” Rod 2 pcs. E I Socket Collar 4 pcs. J Steel Collar 4 pcs. K Fixture Assembly 1 pc. L Lock Screw 4 pcs. M Ring 1 pc. N Shade 4 pcs.
PAGE 4
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT STEP 1 - Adjust Fixture Assembly Figure 1 A. Unfold support arms on fixture assembly to proper locations. STEP 2 - Assemble Panel Figure 2 A. Line up the Holes on the Ring (M) with the Lock Holes on the Side Arms, thread the Lock Screws (L) into the Lock Holes on the Side Arms. Hand tighten until snug.
PAGE 5
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT STEP 3 - Assemble Rods Figure 3 6” Rod A. Determine the Rods (G/H) to be assembled to the Fixture Assembly (K) according to your hanging height. B. Pass Supply Wires and Ground Wire through the chosen Rods (G/H) and then thread the chosen Rods (G/H) and the Fixture Assembly (K) together. Hand tighten until snug.
PAGE 6
CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT STEP 5 - Attach Mounting Screws, Lock Washers and Hex Nuts to Crossbar Mounting Screw Crossbar Lock Washer A. Line up a set of holes on the Crossbar (A) and Holes on the Ceiling Canopy (F). B. Thread Mounting Screws (B) into the holes on the Crossbar (A), pass Lock Washers (C) and thread Hex Nut (D) onto the Mounting Screws (B). Hand tighten until snug.
PAGE 7
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT STEP 7 - Make Wire Connections A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors. B. Connect White Supply Wire from the Outlet Box to White Wire from fixture. C. Connect Black (or Red) Supply Wire from the Outlet Box to Black Wire from fixture. D.
PAGE 8
6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-FE5004WT For Style FE5004WT STEP 9 - Attach Shade to Socket A. Place the Shade (N) and Steel Collar (J) over the Socket as shown. Thread the Socket Collar (I) onto the Socket to secure the Shade (N). Hand tighten until snug. Socket Collar Steel Collar Shade Socket Figure 10 STEP 10 - Install Bulb and Bulb Shield Bulb Shield A. This fixture uses Frosted G9 Halogen Bulbs. Maximum 100 watts (supplied). B.