Installation Guide

-of-13

INSTALLATION GUIDE

FOR GDN2820BN and GDN2820CG

CARE AND MAINTENANCE

SAFETY INFORMATION

Released Date: 202 -023-23

• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean ﬁxture as they may damage

the ﬁnish.

If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at

www.quoizel.com.

Please read and understand this entire manual before attempting to assemble, install or operate the product.

WARNING

• RISK OF ELECTRIC SHOCK - Before beginning installation, turn oﬀ electricity at the circuit breaker box or the main fuse box.

• RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture.

CAUTION

• For your safety, read instructions completely before beginning installation.

• If in doubt about electrical installation, consult a licensed electrician.

• Turn oﬀ electricity to ﬁxture before replacing the bulb(s).

TOOLS REQUIRED

Ceiling Canopy

x 1

12”L Rod

x 2

6”L Rod

x 2

Socket Assembly

x 1

PACKAGE CONTENTS

MOUNTING HARDWARE

Crossbar Assembly

Wire Connector

Outlet Box Screw

Side Arm

Cage

x 1

PAGE 1
INSTALLATION GUIDE FOR GDN2820BN and GDN2820CG SAFETY INFORMATION Released Date: 202 2 -0 3-23 Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING • RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. • RISK OF FIRE - Use bulbs speciﬁed by the markings and/or labels on the ﬁxture. CAUTION • For your safety, read instructions completely before beginning installation.
PAGE 2
INSTALLATION 1 Install Side Arms to Cage Install Ring Remove Ring 2 Install Side Arms to Top Assembly Install Side Arms 3 Install Rods Optional Rods: 8 Feet Ceiling: (1) 6"L Rod + (1) 12"L Rod. 9 Feet Ceiling: (1) 6"L Rod + (2) 12"L Rods. 10 Feet Ceiling: (2) 6"L Rods + (2) 12"L Rods.
PAGE 3
INSTALLATION 6 Wiring Install Ceiling Canopy to Crossbar Assembly 7 White wire from supply White from ﬁxture Black (or red) wire from supply Black from ﬁxture Ground wire from ﬁxture Ground wire from supply 90Degree Swivel Green ground screw For angled ceilings, Swivel opening towards wall. 8 Install Bulbs Install four correct bulbs referring to ﬁxture markings and/or labels for maximum wattage.