Installation Sheet

ManualsBrandsQuoizel Manualspost lightsQuoizel Hogan Single Light 18" Tall Outdoor Single Head Post Light

Package Contents

Warnings and Cautions

1of2

For Style HGN9010WT

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Pleasegoto forproductcleaningtips.Gotothe selection.

markingpen,1/16”

drillbit,centerpunch,hammer,drillandwrench.

(1)A21MediumBaseBulb150WMaximum,MediumBaseVintageBulbisrecommended,bulbnotincluded.

30-45minutes

Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare

present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactyouroriginalplaceofpurchase.

www.quoizel.com Care+Maintenance

LightSource:

EstimatedAssembly Time:

Preparation:

ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses,

Installation Guide #IS-HGN9010WT

2019 QuoizelInc.

ReleasedDate:2019-03-22

visit us on-line at www.quoizel.com

Mounting Screw

Screw

Fixture Body

STEP 1 Remove Cage from the

Fixture Body

A. Unlock screws on the bracket and

remove the cage from the Fixture

Body (C).

Figure 1

Glass Shade

STEP 3 Install Glass Shade-

A. Remove the lock ball and flat

washer from the nipple in the top

center of the cage.

B. Place the Glass Shade (D) into

the cage and pass the center

hole on the top of the Glass

Shade (D) over the nipple in the

top center of the cage. Secure

Glass Shade (D) by threading

previously removed flat washer

and lock ball back onto the

nipple. Hand tighten until snug.

Cage

Screw

Bracket

STEP 2 Install Bulb-

A. Insert the bulb onto the socket

and screw snugly into place.

Figure 2

Socket

Vintage Bulb

(recommended

but not included)

Cage

Nipple

Flat Washer

Lock Ball

Figure 3

STEP 4 Install Cage with

Glass Shade

A. Place the cage with glass

shade onto the bracket and

secure with previously

removed screws. Hand

tighten until snug.

Cage with

Glass Shade

Screw

Bracket

Figure 4

Summary of content (2 pages)

PAGE 1
Installation Guide #IS-HGN9010WT For Style HGN9010WT Please go to www.quoizel.com for product cleaning tips. Go to the Care + Maintenance selection. Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses, marking pen, 1/16” drill bit, center punch, hammer, drill and wrench. Light Source: (1) A21 Medium Base Bulb 150W Maximum, Medium Base Vintage Bulb is recommended, bulb not included.
PAGE 2
STEP 5 - Mark the Location for the 3 Mounting Holes STEP 9 - Attach the fixture to the Post Mount A. Place the light fixture onto the post and mark the location of the 3 mounting holes on the fixture fitter onto the post with the marking pen. A. Place the fixture on the post lining up the mounting holes on the fixture fitter with the holes on the post. Use the Mounting Screws (A) to attach the fixture to the post. Your fixture is now assembled and ready to use.