Installation Sheet

1of1
For Style HS8604BN
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Pleasegoto forproductcleaningtips.Gotothe selection.
(4)A19MediumBase100WbulbMaximum,bulbnotincluded.
30-45minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtoensureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.MissingParts?Contactyouroriginalplaceof
purchase.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssembly Time:
Preparation:
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Installation Guide #IS-HS8604BN
2018 QuoizelInc.
visit us on-line at www.quoizel.com
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box
White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
STEP 2 - Wire Connections
A.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
Package Contents
ReleasedDate:2019-01-17
B
Lock Screw
x2
A
Shade
x4
E
D
Crossbar
x1
Figure 1
STEP 1 Install the Crossbar to the junction box-
.
A. Attach the Crossbar (A) to the Outlet Box with the head of the Green
Ground Screw facing you. Secure it with Outlet Box Screws (not
included), tighten until snug
Outlet Box
A
Outlet Box Screw
(not included)
HS8604BN
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
Fixture Body
x1
C
Socket
Collar
x4
E
B
A
STEP 3 Install Fixture Body-
A. Place the Backplate and the
Fixture Body (E) over the
Crossbar (A). Line up Holes on
the side of backplate and the
Mounting Hole on the Crossbar
(A). Secure by threading Lock
Screws (B) into the Crossbar (A).
Tighten until sung.
Backplate
Figure 3
STEP 4 - Install Shades and
Bulbs
A. Position the Shade (D) over the
Socket as shown. Secure the
Shade (D) by threading the
Socket Collar (C) onto the
Socket. Hand tighten until snug.
B. Insert bulbs onto sockets and
screw snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Figure 4
D
C
Bulb (not
supplied)
Socket
32”
5”Dia.
5.25”
7.5”
9.5”
4.75”
6.75”
FINISH: BRUSHED NICKEL